When to replace the Lambda Sensor on your PEUGEOT RCZ
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
PEUGEOT RCZ Coupe 1.6 16V, PEUGEOT RCZ Coupe 1.6 16V, PEUGEOT RCZ Coupe 1.6 16V, PEUGEOT RCZ Coupe 1.6 THP, PEUGEOT RCZ Coupe 1.6 THP, PEUGEOT RCZ Coupe 1.6 16V View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for RCZ Coupe and other PEUGEOT models
Alternative products
How to change Lambda sensor on Peugeot RCZ Coupe 2.0 HDi – step-by-step instructions for straightforward car repair Lambda sensor
Tools
Replacement: lambda sensor – PEUGEOT RCZ. Tools you might need:
Wire brush
WD-40 spray
Electronic spray
Copper grease
Torque wrench
Combination spanner #22
22-mm oxygen sensor socket
Ratchet wrench
Thread tap
Fender cover
Replacement: lambda sensor – PEUGEOT RCZ. AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – PEUGEOT RCZ – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Lambda Sensor on Peugeot RCZ Coupe 2010 - free PDF and video manuals
    Detach the oxygen sensor connector.
  2. Step 4
    How to replace PEUGEOT RCZ Coupe 2.0 HDi 2011 Lambda Sensor - step-by-step manuals and video guides
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  3. Step 5
    Peugeot RCZ Coupe 1.6 16V 2012 Lambda Sensor replacement: free workshop manuals
    Unscrew the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a ratchet wrench.
  4. Step 6
    Changing Lambda Sensor on PEUGEOT RCZ Coupe 2.0 HDi 2013 by yourself
    Remove the oxygen sensor.
  5. Step 7
    How to remove PEUGEOT RCZ 1.6 16V 2014 Lambda Sensor - online easy-to-follow instructions
    Clean the oxygen sensor mounting seat. Use WD-40 spray.
  6. Step 8
    How to replace Lambda Sensor on PEUGEOT RCZ Coupe 2015: download PDF manuals and video instructions
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the PEUGEOT RCZ Coupe model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY PEUGEOT RCZ Coupe Lambda Sensor replacement - online guide
Tips & tricks for your PEUGEOT RCZ Coupe
View more
  • How to change Oxygen sensor on PEUGEOT RCZ Coupe 1.6 THP - replacement tricks
    Kolbenschmidt plastic gauge overview
  • Changing O2 sensor Peugeot RCZ Coupe 2.0 HDi - Replacement Tips
    Checking the starter without removing it | AUTODOC tips
  • Maintenance Hacks - PEUGEOT RCZ Coupe 1.6 16V NOx sensor replacement guide
    5 Essential Tips for beginner drivers: Avoid Common Mistakes
  • Replace Lambda sensors on Peugeot RCZ Coupe - free video tips
    7 signs of faulty fuel injectors | AUTODOC tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
PEUGEOT RCZ Coupe Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME