When to replace the Lambda Sensor on your PEUGEOT 307
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
PEUGEOT 307 (3A/C) 2.0, PEUGEOT 307 (3A/C) 2.0 Flex, PEUGEOT 307 (3A/C) 2.0 16V View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for 307 (3A/C) and other PEUGEOT models
Alternative products
How to change Lambda sensor on Peugeot 307 3A/C 1.6 16V – step-by-step instructions for straightforward car repair Lambda sensor
Tools
Replacement: lambda sensor – PEUGEOT 307 (3A/C). Tools you might need:
Wire brush
WD-40 spray
Electronic spray
Copper grease
Torque wrench
Combination spanner #22
22-mm oxygen sensor socket
Ratchet wrench
Thread tap
Fender cover
Replacement: lambda sensor – PEUGEOT 307 (3A/C). AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – PEUGEOT 307 (3A/C) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Lambda Sensor on Peugeot 307 3A/C 2000 - free PDF and video manuals
    Detach the oxygen sensor connector.
  2. Step 4
    How to replace PEUGEOT 307 (3A/C) 1.6 16V 2001 Lambda Sensor - step-by-step manuals and video guides
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  3. Step 5
    Peugeot 307 3A/C 2.0 HDi 2002 Lambda Sensor replacement: free workshop manuals
    Unscrew the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a ratchet wrench.
  4. Step 6
    Changing Lambda Sensor on PEUGEOT 307 (3A/C) 2.0 16V 2003 by yourself
    Remove the oxygen sensor.
  5. Step 7
    How to remove PEUGEOT 307 1.4 HDi 2004 Lambda Sensor - online easy-to-follow instructions
    Clean the oxygen sensor mounting seat. Use WD-40 spray.
  6. Step 8
    How to replace Lambda Sensor on PEUGEOT 307 (3A/C) 2005: download PDF manuals and video instructions
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the PEUGEOT 307 Hatchback (3A/C) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY PEUGEOT 307 (3A/C) Lambda Sensor replacement - online guide
Tips & tricks for your PEUGEOT 307 (3A/C)
View more
  • How to change Oxygen sensor on PEUGEOT 307 (3A/C) 1.6 HDi - replacement tricks
    Reviving Your Car: How to Start After Extended Idle Time | AUTODOC Tips
  • Changing O2 sensor Peugeot 307 3A/C 1.6 16V - Replacement Tips
    How I started restoring a driveshaft | Drivetrain restoration – Part 1
  • Maintenance Hacks - PEUGEOT 307 (3A/C) 2.0 HDi NOx sensor replacement guide
    5 Essential Tips to Prepare Your Car for Winter | AUTODOC tips
  • Replace Lambda sensors on Peugeot 307 3A/C - free video tips
    How to remove scratches from car plastic | AUTODOC tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
PEUGEOT 307 (3A/C) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME