When to replace the Lambda Sensor on your PEUGEOT 107
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
PEUGEOT 107 Hatchback (PM_, PN_) 1.0 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for 107 Hatchback (PM_, PN_) and other PEUGEOT models
Tools
Replacement: lambda sensor – PEUGEOT 107. Tools you might need:
Wire brush
WD-40 spray
Electronic spray
Copper grease
Torque wrench
Combination spanner #22
22-mm oxygen sensor socket
Ratchet wrench
Thread tap
Fender cover
Replacement: lambda sensor – PEUGEOT 107. AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – PEUGEOT 107 – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Lambda Sensor on Peugeot 107 PN 2005 - free PDF and video manuals
    Detach the oxygen sensor connector.
  2. Step 4
    How to replace PEUGEOT 107 Hatchback (PM_, PN_) 1.0 2006 Lambda Sensor - step-by-step manuals and video guides
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  3. Step 5
    Peugeot 107 PN 1.4 HDi 2007 Lambda Sensor replacement: free workshop manuals
    Unscrew the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a ratchet wrench.
  4. Step 6
    Changing Lambda Sensor on PEUGEOT 107 Hatchback (PM_, PN_) 1.4 HDi 2008 by yourself
    Remove the oxygen sensor.
  5. Step 7
    How to remove PEUGEOT 107 1.0 2009 Lambda Sensor - online easy-to-follow instructions
    Clean the oxygen sensor mounting seat. Use WD-40 spray.
  6. Step 8
    How to replace Lambda Sensor on PEUGEOT 107 Hatchback (PM_, PN_) 2010: download PDF manuals and video instructions
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the PEUGEOT 107 Hatchback (PM, PN) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
PEUGEOT 107 Hatchback (PM_, PN_) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY PEUGEOT 107 Hatchback (PM_, PN_) Lambda Sensor replacement - online guide
Tips & tricks for your PEUGEOT 107 Hatchback (PM_, PN_)
View more
  • How to change Oxygen sensor on PEUGEOT 107 Hatchback (PM_, PN_) 1.0 - replacement tricks
    3 things to know before buying summer tyres | AUTODOC tips
  • Changing O2 sensor Peugeot 107 PN 1.0 - Replacement Tips
    5 Tips for New Drivers | AUTODOC tips
  • Maintenance Hacks - PEUGEOT 107 Hatchback (PM_, PN_) 1.4 HDi NOx sensor replacement guide
    What to do if your check engine light is on | AUTODOC tips
  • Replace Lambda sensors on Peugeot 107 PN - free video tips
    How to check your head gasket | AUTODOC