How to carry out replacement: Lambda Sensor 2.0 CDTI (68) Opel Insignia A g09
Disclaimer
Change Opel Insignia A g09 1.6 CDTi (68) Lambda Sensor yourself – manuals and video tutorials

How to change lambda sensor on OPEL INSIGNIA – replacement guide

downloads: 11
Views: 200
Download your free tutorial and fix OPEL INSIGNIA 1.8 (68) problems yourself Download for free 829.44 KB Lambda Sensor for Opel Insignia A g09 Shop now
Leave a comment Open in a new tab
When to replace the Lambda Sensor on your OPEL INSIGNIA
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
OPEL INSIGNIA 2.0 E85 Turbo (68), OPEL INSIGNIA 1.4 (68), OPEL INSIGNIA 2.0 Turbo (68), OPEL INSIGNIA 2.0 Turbo 4x4 (68), OPEL INSIGNIA 1.4 LPG (68) … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for INSIGNIA and other OPEL models
How to change Lambda sensor on Opel Insignia A g09 2.0 CDTI (68) – step-by-step instructions for straightforward car repair Lambda sensor
How to change Lambda sensor on Insignia A Hatchback (G09) – tips for proper car maintenance
Lambda sensor for Insignia A Hatchback (G09) Petrol/Ethanol (220 hp)
Simple DIY car repair steps – Replacing Lambda sensor on Insignia A Hatchback (G09)
Lambda sensor for Insignia A Hatchback (G09) Petrol (140 hp)
Easy tricks to help you to replace Lambda sensor on Insignia A Hatchback (G09)
Lambda sensor for Insignia A Hatchback (G09) Petrol (220 hp)
Lambda sensor removal & installation, incredibly easy steps for Insignia A Hatchback (G09)
Lambda sensor for Insignia A Hatchback (G09) Petrol (220 hp)
Changing Lambda sensor on Insignia A Hatchback (G09) – tips for first time repair
Lambda sensor for Insignia A Hatchback (G09) Petrol/Petroleum Gas (LPG) (140 hp)
Tools
Replacement: lambda sensor – OPEL INSIGNIA. List of the tools you'll need:
Wire brush
WD-40 spray
Electronic spray
High-temperature ceramic grease
Torque wrench
Combination spanner #22
Flare nut wrench #22
Ratchet wrench
Thread tap
Fender cover
Buy tools
Replacement: lambda sensor – OPEL INSIGNIA. AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – OPEL INSIGNIA – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Lambda Sensor on Opel Insignia A g09 2008 - free PDF and video manuals
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  2. Step 5
    How to replace OPEL INSIGNIA 2.0 CDTI (68) 2009 Lambda Sensor - step-by-step manuals and video guides
    Detach the oxygen sensor connector.
  3. Step 6
    Opel Insignia A g09 1.8 (68) 2010 Lambda Sensor replacement: free workshop manuals
    Unscrew the oxygen sensor fastener. Use a flare nut spanner #22.
  4. Step 7
    Changing Lambda Sensor on OPEL INSIGNIA 1.6 Turbo (68) 2011 by yourself
    Remove the oxygen sensor.
  5. Step 8
    How to remove OPEL INSIGNIA 2.8 V6 Turbo OPC 4x4 (68) 2012 Lambda Sensor - online easy-to-follow instructions
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
  6. Step 9
    Treat the oxygen sensor. Use high-temperature ceramic grease.
    Step 10
    How to replace Lambda Sensor on OPEL INSIGNIA 2013: download PDF manuals and video instructions
    Install the new oxygen sensor.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the OPEL Insignia A Hatchback (G09) model.

Browse tyres

Popular maintenance tutorials for Opel Insignia A g09

More manuals for Opel Insignia A g09

Complete guides for changing the Oxygen sensor on different OPEL INSIGNIA models

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
OPEL INSIGNIA Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY OPEL INSIGNIA Lambda Sensor replacement - online guide
Tips & tricks for your OPEL INSIGNIA
View more
  • How to change Oxygen sensor on OPEL INSIGNIA 1.6 CDTi (68) - replacement tricks
    TOP 8 mistakes car owners make | AUTODOC tips
    14K views
    Published on: 09/12/2021
  • Changing O2 sensor Opel Insignia A g09 2.0 CDTI (68) - Replacement Tips
    How to replace a wheel stud | AUTODOC tips
    8K views
    Published on: 08/12/2020
  • Maintenance Hacks - OPEL INSIGNIA 1.8 (68) NOx sensor replacement guide
    How to restore a steering wheel | AUTODOC tips
    32K views
    Published on: 17/02/2022
  • Replace Lambda sensors on Opel Insignia A g09 - free video tips
    What to do if the TPMS light is on | AUTODOC tips
    6K views
    Published on: 28/09/2023

Most commonly replaced car parts on OPEL INSIGNIA

Professional manuals for the most common OPEL models