When to replace the Lambda Sensor on your OPEL MERIVA
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
OPEL Meriva A (X03) 1.6 (E75) View more

The steps may slightly vary depending on the car design.

How to change lambda sensor on OPEL MERIVA A [TUTORIAL AUTODOC]

video
All the parts you need to replace – Lambda Sensor for Meriva A (X03) and other OPEL models
Tools
Replacement: lambda sensor – Opel Meriva X03. Tools you'll need:
Wire brush
WD-40 spray
Electronic spray
High-temperature ceramic grease
Torque wrench
Flare nut wrench #22
Drive socket # 22
Ratchet wrench
Thread tap
Fender cover
Replacement: lambda sensor – Opel Meriva X03. AUTODOC recommends:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – Opel Meriva X03 – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Lambda Sensor on Opel Meriva x03 2003 - free PDF and video manuals
    Open the bonnet.
  2. Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to replace OPEL Meriva A (X03) 1.7 CDTI (E75) 2004 Lambda Sensor - step-by-step manuals and video guides
    Lift the car using a jack or place it over an inspection pit.
  3. Step 4
    Opel Meriva x03 1.6 16V (E75) 2005 Lambda Sensor replacement: free workshop manuals
    Detach the oxygen sensor connector.
  4. Step 5
    Changing Lambda Sensor on OPEL Meriva A (X03) 1.6 (E75) 2006 by yourself
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  5. Step 6
    How to remove OPEL MERIVA 1.3 CDTI (E75) 2007 Lambda Sensor - online easy-to-follow instructions
    Unscrew the oxygen sensor fastener. Use a flare nut spanner #22.
  6. Step 7
    How to replace Lambda Sensor on OPEL Meriva A (X03) 2008: download PDF manuals and video instructions
    Remove the oxygen sensor.
  7. Step 8
    How hard is it to do yourself: Lambda Sensor replacement on Opel Meriva x03 1.7 DTI (E75) 2009 - download illustrated guide
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
  8. Step 9
    Need to know how to renew Lambda Sensor on OPEL MERIVA 2010? This free workshop manual will help you to do it yourself
    Treat the oxygen sensor. Use high-temperature ceramic grease.
  9. Step 10
    Changing of Lambda Sensor on Opel Meriva x03 2003 won't be an issue if you follow this illustrated step-by-step guide
    Install the new oxygen sensor.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the OPEL Meriva A (X03) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY OPEL Meriva A (X03) Lambda Sensor replacement - online guide
Tips & tricks for your OPEL Meriva A (X03)
View more
  • How to change Oxygen sensor on OPEL Meriva A (X03) 1.4 16V Twinport (E75) - replacement tricks
    Don’t Replace, Just Polish! Headlight Restoration with AUTODOC
  • Changing O2 sensor Opel Meriva x03 1.7 CDTI (E75) - Replacement Tips
    DIY starter repair | AUTODOC tips
  • Maintenance Hacks - OPEL Meriva A (X03) 1.6 16V (E75) NOx sensor replacement guide
    5 mistakes made when washing the engine | AUTODOC tips
  • Replace Lambda sensors on Opel Meriva x03 - free video tips
    DIY jack restoration | AUTODOC tips

Professional manuals for the most common OPEL models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
OPEL Meriva A (X03) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME