Important!
This replacement procedure can be used for:
OPEL INSIGNIA 2.0 E85 Turbo (68), OPEL INSIGNIA 1.4 (68), OPEL INSIGNIA 2.0 Turbo 4x4 (68), OPEL INSIGNIA 2.0 Biturbo CDTI (68), OPEL INSIGNIA 2.0 Biturbo CDTI 4x4 (68), OPEL INSIGNIA 2.0 CDTI (68), OPEL INSIGNIA 2.0 CDTI (68), OPEL INSIGNIA 1.6 (68), OPEL INSIGNIA 1.8 (68), OPEL INSIGNIA 2.0 Turbo (68), OPEL INSIGNIA 2.8 V6 Turbo 4x4 (68), OPEL INSIGNIA 2.0 CDTI (68), OPEL INSIGNIA 2.0 CDTI (68), OPEL INSIGNIA 2.0 CDTI (68), OPEL INSIGNIA 2.0 CDTI 4x4 (68), OPEL INSIGNIA 2.0 Biturbo CDTI (68), OPEL INSIGNIA 1.6 Turbo (68), OPEL INSIGNIA 2.0 Turbo 4x4 (68), OPEL INSIGNIA 2.0 Biturbo CDTI 4x4 (68), OPEL INSIGNIA 2.8 V6 Turbo OPC 4x4 (68), OPEL INSIGNIA 2.0 CDTI 4x4 (68), OPEL INSIGNIA 1.4 LPG (68), OPEL INSIGNIA 1.6 SIDI (68), OPEL INSIGNIA 2.0 CDTI (68), OPEL INSIGNIA 2.0 Turbo (68), OPEL INSIGNIA 2.0 CDTI (68), OPEL INSIGNIA 2.0 CDTI 4x4 (68), OPEL INSIGNIA 1.6 CDTi (68), OPEL INSIGNIA 1.6 CDTi (68) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for INSIGNIA and other OPEL models
Tools
Replacement: anti roll bar links – OPEL INSIGNIA. Tools you need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #18
Combination spanner #19
Drive socket # 18
Drive socket # 19
Wheel impact socket #19
Ratchet wrench
Torque wrench
Wheel chock
Replacement: anti roll bar links – OPEL INSIGNIA. AUTODOC recommends:
  • Replace the stabiliser links on OPEL INSIGNIA in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • All work should be done with the engine stopped.
Replacement: anti roll bar links – OPEL INSIGNIA. Use the following procedure:
  1. Step 1
    How to change Anti Roll Bar Links on Opel Insignia A g09 2008 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace OPEL INSIGNIA 2.0 CDTI (68) 2009 Anti Roll Bar Links - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Opel Insignia A g09 1.8 (68) 2010 Anti Roll Bar Links replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. OPEL INSIGNIA
  4. Step 5
    Changing Anti Roll Bar Links on OPEL INSIGNIA 1.6 Turbo (68) 2011 by yourself
    Remove the wheel.
  5. Step 6
    How to remove OPEL INSIGNIA 2.8 V6 Turbo OPC 4x4 (68) 2012 Anti Roll Bar Links - online easy-to-follow instructions
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Anti Roll Bar Links on OPEL INSIGNIA 2013: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #19. Use a drive socket #19. Use a ratchet wrench.
  7. Step 8
    How hard is it to do yourself: Anti Roll Bar Links replacement on Opel Insignia A g09 2.0 CDTI (68) 2014 - download illustrated guide
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  8. Step 9
    Need to know how to renew Anti Roll Bar Links on OPEL INSIGNIA 2015? This free workshop manual will help you to do it yourself
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #19 (2 pieces).
  9. Step 10
    Changing of Anti Roll Bar Links on Opel Insignia A g09 2016 won't be an issue if you follow this illustrated step-by-step guide
    Remove the stabilizer rod.
    Replacement: anti roll bar links – OPEL INSIGNIA. AUTODOC experts recommend:
    Examine stabiliser bushes. Replace them if needed.
  10. Step 11
    OPEL INSIGNIA 1.6 CDTi (68) Anti Roll Bar Links replacement: online guides and video tutorials
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
  11. Step 12
    Replacing Anti Roll Bar Links on Opel Insignia A g09 2008 2.0 CDTI (68) by yourself
    Ιnstall the transverse stabilizer link.
  12. Step 13
    INSIGNIA 2.8 V6 Turbo OPC 4x4 (68) 2009 Anti Roll Bar Links DIY replacement workshop manual
    Tighten the stabiliser link fastener. Use a combination spanner #18.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the OPEL Insignia A Hatchback (G09) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
OPEL INSIGNIA Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY OPEL INSIGNIA Anti Roll Bar Links replacement - online guide
Tips & tricks for your OPEL INSIGNIA
View more
  • How to change Drop links on OPEL INSIGNIA 1.6 CDTi (68) - replacement tricks
    Coolant comparison test | AUTODOC
  • Changing Stabilizer link Opel Insignia A g09 2.0 CDTI (68) - Replacement Tips
    5 most common causes of oil leaks | AUTODOC tips
  • Maintenance Hacks - OPEL INSIGNIA 1.8 (68) Sway bar link replacement guide
    How to clean an engine bay | AUTODOC
  • Replace Drop link on Opel Insignia A g09 - free video tips
    How to restore wheel rims | AUTODOC tips

Professional manuals for the most common OPEL models