
Disclaimer
How to change lambda sensor on AUDI TT Roadster (8J9) – replacement guide
downloads:
3
Views:
20

Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
AUDI TT Roadster (8J9) 2.0 TFSI, AUDI TT Roadster (8J9) 2.0 TFSI quattro, AUDI TT Roadster (8J9) 2.5 RS quattro, AUDI TT Roadster (8J9) 2.0 TFSI, AUDI TT Roadster (8J9) 3.2 V6 quattro, AUDI TT Roadster (8J9) 2.0 TTS quattro, AUDI TT Roadster (8J9) 1.8 TFSI, AUDI TT Roadster (8J9) 2.0 TTS quattro, AUDI TT Roadster (8J9) 2.0 TFSI quattro, AUDI TT Roadster (8J9) 2.5 RS quattro … View more
The steps may slightly vary depending on the car design.
AUDI TT Roadster (8J9) 2.0 TFSI, AUDI TT Roadster (8J9) 2.0 TFSI quattro, AUDI TT Roadster (8J9) 2.5 RS quattro, AUDI TT Roadster (8J9) 2.0 TFSI, AUDI TT Roadster (8J9) 3.2 V6 quattro, AUDI TT Roadster (8J9) 2.0 TTS quattro, AUDI TT Roadster (8J9) 1.8 TFSI, AUDI TT Roadster (8J9) 2.0 TTS quattro, AUDI TT Roadster (8J9) 2.0 TFSI quattro, AUDI TT Roadster (8J9) 2.5 RS quattro … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Lambda Sensor for TT Roadster (8J9) and other AUDI models
Lambda sensor
Alternative products

Electronic spray
High-temperature ceramic grease
Torque wrench
Drive socket # 10
22-mm oxygen sensor socket
Ratchet wrench
Thread tap
Fender cover
Replacement: lambda sensor – AUDI TT Roadster (8J9). AUTODOC experts recommend:
- After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
- Before getting down to work, start the engine and let it warm up to operating temperature.
- Please note: all work on the car – AUDI TT Roadster (8J9) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Lift the car using a jack or place it over an inspection pit.Step 4Unscrew the fasteners of the oxygen sensor housing cover. Use a drive socket #10. Use a ratchet wrench.
- Step 5Remove the oxygen sensor housing cover.
- Step 6Detach the oxygen sensor connector.
- Step 7Unscrew the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a ratchet wrench.
- Step 8Remove the oxygen sensor.
- Step 9Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
- Step 10Treat the oxygen sensor. Use high-temperature ceramic grease.Step 11Install the new oxygen sensor.
- Step 12Tighten the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a torque wrench. Tighten it to 37 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the AUDI TT Roadster (8J9) model
Popular maintenance tutorials for Audi TT Roadster
Complete guides for changing the Oxygen sensor on different AUDI TT models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your AUDI TT Roadster (8J9)
View more
- How to replace a timing chain yourself
- The most common problems when buying a used car | AUTODOC
- How to Safely Wash Your Car in Winter Without Damage | AUTODOC tips
- What to do if your car’s bonnet won’t open | AUTODOC tips
Most commonly replaced car parts on AUDI TT
Time to replace parts? Get even better deals in our Shop app.

SCAN ME