When to replace the Ignition Leads on your VW PASSAT
Recommended replacement interval for the part category Ignition Cable Kit : 60000 km
Important!
This replacement procedure can be used for:
VW Passat Variant (33B) 1.6, VW Passat Variant (33B) 1.8, VW Passat Variant (33B) 1.8, VW Passat Variant (33B) 1.8 Syncro, VW Passat Variant (33B) 1.8, VW Passat Variant (33B) 1.6, VW Passat Variant (33B) 1.6, VW Passat Variant (33B) 1.6 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: ignition leads – VW PASSAT Variant (32B). Tools you might need:
Pincers
Fender cover
Replacement: ignition leads – VW PASSAT Variant (32B). Professionals recommend:
  • All work should be done with the engine stopped.
Replacement: ignition leads – VW PASSAT Variant (32B). Take the following steps:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Ignition Leads on VW Passat 32B 1980 - free PDF and video manuals
    Disconnect the high voltage wire.
    Replacement: ignition leads – VW PASSAT Variant (32B). Tip:
    Wear dielectric gloves.
  2. Step 4
    How to replace VW Passat Variant (33B) 1.8 1981 Ignition Leads - step-by-step manuals and video guides
    Make marks on the distributor cap to indicate the installation order of the spark plug wires.
  3. Step 5
    VW Passat 32B 1.6 D 1982 Ignition Leads replacement: free workshop manuals
    Disconnect the spark plug wires from the spark plugs. Use pincers.
    Replacement: ignition leads – VW PASSAT Variant (32B). AUTODOC recommends:
    Be careful to avoid damaging spark plug wires.
  4. Step 6
    Changing Ignition Leads on VW Passat Variant (33B) 1.6 1983 by yourself
    Disconnect the spark plug wires from the distributor cap.
    Replacement: ignition leads – VW PASSAT Variant (32B). AUTODOC experts recommend:
    Be careful to avoid damaging spark plug wires.
  5. Step 7
    How to remove VW PASSAT 2.2 1984 Ignition Leads - online easy-to-follow instructions
    Connect new spark plug wires to the distributor cap.
    Replacement: ignition leads – VW PASSAT Variant (32B). AUTODOC recommends:
    Follow the installation sequence.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the VW Passat B2 Variant (33B) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VW Passat Variant (33B) Ignition Leads replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VW Passat Variant (33B) Ignition Leads replacement - online guide
Tips & tricks for your VW Passat Variant (33B)
View more
  • How to change Plug leads on VW Passat Variant (33B) 1.6 TD - replacement tricks
    How to remove scratches from car plastic | AUTODOC tips
  • Changing Spark plug leads VW Passat 32B 1.8 - Replacement Tips
    Car checks you need to carry out on your car after the winter | AUTODOC tips
  • Maintenance Hacks - VW Passat Variant (33B) 1.6 D Spark plug wire replacement guide
    What to do if your check engine light is on | AUTODOC tips
  • Replace Ignition cable set on VW Passat 32B - free video tips
    How to save when buying car parts