Important!
This replacement procedure can be used for:
VW GOLF III (1H1) 1.4, VW GOLF III (1H1) 1.6, VW GOLF III (1H1) 1.8, VW GOLF III (1H1) 1.8, VW GOLF III (1H1) 1.8 Syncro (1HX1), VW GOLF III (1H1) 2.0, VW GOLF III (1H1) 2.0 GTI 16V, VW GOLF III (1H1) 1.4, VW GOLF III (1H1) 2.8 VR6, VW GOLF III (1H1) 1.6, VW GOLF III (1H1) 2.0 Syncro (1HX1), VW GOLF III (1H1) 2.0 GL View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Ignition Coil for GOLF III (1H1) and other VW models
Tools
Replacement: ignition coil – VW GOLF III (1H1). Tools you might need:
Electronic spray
Torque wrench
Combination spanner #10
Drive socket # 13
HEX bit No.H5
HEX bit No.H6
Ratchet wrench
Microfibre towel
Fender cover
Replacement: ignition coil – VW GOLF III (1H1). Tip from AUTODOC experts:
  • The replacement procedure is the same for the ignition coils of all cylinders.
  • All work should be done with the engine stopped.
Replacement: ignition coil – VW GOLF III (1H1). Recommended sequence of steps:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Ignition Coil on Golf 3 1991 - free PDF and video manuals
    Disconnect the secondary air pump hoses.
  2. Step 4
    How to replace VW GOLF III (1H1) 2.8 VR6 1992 Ignition Coil - step-by-step manuals and video guides
    Cover the secondary air pump channels with a microfibre cloth to prevent dust and dirt from getting inside.
  3. Step 5
    Golf 3 2.0 1993 Ignition Coil replacement: free workshop manuals
    Detach the secondary air pump connector.
  4. Step 6
    Changing Ignition Coil on VW GOLF III (1H1) 1.9 TDI 1994 by yourself
    Unscrew the fasteners connecting the secondary air pump to its bracket. Use a combination spanner #10.
  5. Step 7
    How to remove VW GOLF 1.6 1995 Ignition Coil - online easy-to-follow instructions
    Remove the secondary air pump.
  6. Step 8
    How to replace Ignition Coil on VW GOLF III (1H1) 1996: download PDF manuals and video instructions
    Unscrew the fastener of the secondary air pump bracket. Use HEX No.H6. Use a drive socket #13. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Ignition Coil replacement on Golf 3 2.0 GTI 16V 1997 - download illustrated guide
    Remove the secondary air pump bracket.
  8. Step 10
    Need to know how to renew Ignition Coil on VW GOLF 1998? This free workshop manual will help you to do it yourself
    Detach the connector from the ignition coil.
  9. Step 11
    Changing of Ignition Coil on Golf 3 1991 won't be an issue if you follow this illustrated step-by-step guide
    Disconnect the spark plug wires from the ignition coil.
    Replacement: ignition coil – VW GOLF III (1H1). Tip:
    Remember the sequence of the spark plug wires connectors.
  10. Step 12
    VW GOLF 2.8 VR6 Ignition Coil replacement: online guides and video tutorials
    Unscrew the ignition coil bracket. Use HEX No.H5. Use a ratchet wrench.
  11. Step 13
    Replacing Ignition Coil on Golf 3 1993 2.8 VR6 by yourself
    Remove the ignition coil.
  12. Step 14
    GOLF III (1H1) 1.6 1994 Ignition Coil DIY replacement workshop manual
    Treat the ignition coil connector with electronic spray. The spray will protect the electrical contacts from corrosion, oxidation, and will reduce the contact resistance.
  13. Step 15
    How to change Ignition Coil on VW GOLF III (1H1) 1995 - tips and tricks
    Treat the spark plug wire connectors. Use electronic spray.
  14. Step 16
    Step-by-step recommendations for DIY replacement Golf 3 1996 1.6 Ignition Coil
    Install the new ignition coil to the spark plug well. Make sure you hear a click indicating that it is locked in place.
  15. Step 17
    DIY replacement of Ignition Coil on VW GOLF III (1H1) 1.8 1997 is not an issue anymore with our step-by-step tutorial
    Tighten the ignition coil fastening. Use HEX No.H5. Use a torque wrench. Tighten it to 7 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the VW Golf III Hatchback (1H1) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VW GOLF III (1H1) Ignition Coil replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VW GOLF III (1H1) Ignition Coil replacement - online guide
Tips & tricks for your VW GOLF III (1H1)
View more
  • How to change Coil pack on VW GOLF III (1H1) 1.8 - replacement tricks
    How to repair a chipped or cracked windscreen | AUTODOC tips
  • Changing Ignition coil pack Golf 3 2.8 VR6 - Replacement Tips
    DIY brake caliper restoration | AUTODOC tips
  • Maintenance Hacks - VW GOLF III (1H1) 2.0 Ignition coils replacement guide
    How to clean an engine bay | AUTODOC
  • Replace Coil packs on Golf 3 - free video tips
    How to replace a wheel stud | AUTODOC tips