How to carry out replacement: Ignition Coil 2.0 VW BORA
Disclaimer
Change VW BORA 2.0 Ignition Coil yourself – manuals and video tutorials

How to change ignition coil on VW BORA – replacement guide

downloads: 3
Views: 45
Download your free tutorial and fix VW BORA 1.8 Turbo problems yourself Download for free 1.62 MB Ignition Coil for VW BORA Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
VW BORA 2.0 … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Ignition Coil for BORA and other VW models
Alternative products
How to change Ignition coil on VW BORA 2.0 – step-by-step instructions for straightforward car repair Ignition coil
Tools
Replacement: ignition coil – VW BORA. Tools you might need:
Electronic spray
Torque wrench
Combination spanner #10
Drive socket # 13
HEX bit No.H5
HEX bit No.H6
Ratchet wrench
Microfibre towel
Fender cover
Buy tools
Replacement: ignition coil – VW BORA. Tip from AUTODOC experts:
  • The replacement procedure is the same for the ignition coils of all cylinders.
  • All work should be done with the engine stopped.
Replacement: ignition coil – VW BORA. Recommended sequence of steps:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Ignition Coil on VW BORA 2007 - free PDF and video manuals
    Disconnect the secondary air pump hoses.
  2. Step 4
    How to replace VW BORA 2.0 2008 Ignition Coil - step-by-step manuals and video guides
    Cover the secondary air pump channels with a microfibre cloth to prevent dust and dirt from getting inside.
  3. Step 5
    VW BORA 1.8 Turbo 2009 Ignition Coil replacement: free workshop manuals
    Detach the secondary air pump connector.
  4. Step 6
    Changing Ignition Coil on VW BORA 1.8 Turbo 2010 by yourself
    Unscrew the fasteners connecting the secondary air pump to its bracket. Use a combination spanner #10.
  5. Step 7
    How to remove VW BORA 2.0 2011 Ignition Coil - online easy-to-follow instructions
    Remove the secondary air pump.
  6. Step 8
    How to replace Ignition Coil on VW BORA 2012: download PDF manuals and video instructions
    Unscrew the fastener of the secondary air pump bracket. Use HEX No.H6. Use a drive socket #13. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Ignition Coil replacement on VW BORA 2.0 2013 - download illustrated guide
    Remove the secondary air pump bracket.
  8. Step 10
    Need to know how to renew Ignition Coil on VW BORA 2014? This free workshop manual will help you to do it yourself
    Detach the connector from the ignition coil.
  9. Step 11
    Changing of Ignition Coil on VW BORA 2015 won't be an issue if you follow this illustrated step-by-step guide
    Disconnect the spark plug wires from the ignition coil.
    Replacement: ignition coil – VW BORA. Tip:
    Remember the sequence of the spark plug wires connectors.
  10. Step 12
    VW BORA 2.0 Ignition Coil replacement: online guides and video tutorials
    Unscrew the ignition coil bracket. Use HEX No.H5. Use a ratchet wrench.
  11. Step 13
    Replacing Ignition Coil on VW BORA 2017 2.0 by yourself
    Remove the ignition coil.
  12. Step 14
    BORA 2.0 2018 Ignition Coil DIY replacement workshop manual
    Treat the ignition coil connector with electronic spray. The spray will protect the electrical contacts from corrosion, oxidation, and will reduce the contact resistance.
  13. Step 15
    How to change Ignition Coil on VW BORA 2019 - tips and tricks
    Treat the spark plug wire connectors. Use electronic spray.
  14. Step 16
    Step-by-step recommendations for DIY replacement VW BORA 2020 2.0 Ignition Coil
    Install the new ignition coil to the spark plug well. Make sure you hear a click indicating that it is locked in place.
  15. Step 17
    DIY replacement of Ignition Coil on VW BORA 2.0 2021 is not an issue anymore with our step-by-step tutorial
    Tighten the ignition coil fastening. Use HEX No.H5. Use a torque wrench. Tighten it to 7 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the VW Bora Saloon model

VW BORA tyre size

Popular maintenance tutorials for VW BORA

More manuals for VW BORA

Complete guides for changing the Coil pack on different VW BORA models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY VW BORA Ignition Coil replacement - online guide
Tips & tricks for your VW BORA
View more
  • How to change Coil pack on VW BORA 2.0 - replacement tricks
    DIY car soundproofing | AUTODOC tips
    104K views
    Published on: 15/04/2021
  • Changing Ignition coil pack VW BORA 2.0 - Replacement Tips
    How to Order Car Parts Online: Avoid These 5 Common Pitfalls
    4K views
    Published on: 10/03/2022
  • Maintenance Hacks - VW BORA 1.8 Turbo Ignition coils replacement guide
    Top 5 mistakes when replacing spark plugs | AUTODOC tips
    28K views
    Published on: 13/07/2023
  • Replace Coil packs on VW BORA - free video tips
    Transform Your Old Engine Valve Cover: Quick Polishing Tips for a Shiny Finish | AUTODOC Tips
    10K views
    Published on: 30/11/2023

Most commonly replaced car parts on VW BORA

Professional manuals for the most common VW models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
VW BORA Ignition Coil replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME