How to carry out replacement: Ignition Coil 1.0 12V VAUXHALL AGILA Mk I (A)
Disclaimer
Change VAUXHALL AGILA Mk I (A) 1.2 16V Twinport Ignition Coil yourself – manuals and video tutorials

How to change ignition coil on VAUXHALL Agila Mk I (A) (H00) – replacement guide

downloads: 1
Views: 33
Download your free tutorial and fix VAUXHALL Agila Mk I (A) (H00) 1.2 16V problems yourself Download for free 819.2 KB Ignition Coil for VAUXHALL AGILA Mk I (A) Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
VAUXHALL Agila Mk I (A) (H00) 1.2 16V … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Ignition Coil for Agila Mk I (A) (H00) and other VAUXHALL models
How to change Ignition coil on VAUXHALL AGILA Mk I (A) 1.0 12V – step-by-step instructions for straightforward car repair Ignition coil
How to change Ignition coil on Agila Mk1 (A) (H00) – tips for proper car maintenance
Ignition coil for Agila Mk1 (A) (H00) Petrol (75 hp)
Tools
Replacement: ignition coil – VAUXHALL AGILA Mk I (A). Tools you need:
Electronic spray
Torx bit T30
Ratchet wrench
Torque wrench
Flat screwdriver
Crow bar
Fender cover
Buy tools
Replacement: ignition coil – VAUXHALL AGILA Mk I (A). AUTODOC recommends:
  • The replacement procedure is the same for the ignition coils of all cylinders.
  • All work should be done with the engine stopped.
Replacement: ignition coil – VAUXHALL AGILA Mk I (A). Recommended sequence of steps:
  1. Step 1
    Open the hood. Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 2
    How to change Ignition Coil on VAUXHALL AGILA Mk I (A) 2000 - free PDF and video manuals
    Remove the engine cover.
  2. Step 3
    How to replace VAUXHALL Agila Mk I (A) (H00) 1.0 12V 2001 Ignition Coil - step-by-step manuals and video guides
    Detach the connector from the ignition coil. Use a flat screwdriver.
  3. Step 4
    VAUXHALL AGILA Mk I (A) 1.2 16V 2002 Ignition Coil replacement: free workshop manuals
    Unscrew the ignition coil bracket. Use Torx T30. Use a ratchet wrench.
  4. Step 5
    Changing Ignition Coil on VAUXHALL Agila Mk I (A) (H00) 1.0 12V 2003 by yourself
    Pry up the ignition coil. Use a crowbar.
  5. Step 6
    How to remove VAUXHALL AGILA 1.2 16V 2004 Ignition Coil - online easy-to-follow instructions
    Take out the ignition coil from the spark plug well.
  6. Step 7
    How to replace Ignition Coil on VAUXHALL Agila Mk I (A) (H00) 2005: download PDF manuals and video instructions
    Install the new ignition coil to the spark plug well. Make sure you hear a click indicating that it is locked in place.
  7. Step 8
    How hard is it to do yourself: Ignition Coil replacement on VAUXHALL AGILA Mk I (A) 1.0 12V 2006 - download illustrated guide
    Tighten the ignition coil fastening. Use Torx T30. Use a torque wrench. Tighten it to 15 nm torque.
Comments – 2
  • G. H.
    17.10.2023 16:27
    Member
    Done all that. But carnt get the connector back on has an orenge and white air tight seal but won't push back. Can I take the orenge seal out so it will push in easy
  • Stacy Adams
    18.10.2023 11:54
    Member
    It is not recommended to remove the orange seal and its absence can lead to rapid failure of the ignition coil and incorrect engine operation.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the VAUXHALL Agila Mk1 (A) (H00) model.

Browse tyres

Popular maintenance tutorials for VAUXHALL AGILA Mk I (A)

More manuals for VAUXHALL AGILA Mk I (A)

Complete guides for changing the Coil pack on different VAUXHALL AGILA models

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VAUXHALL Agila Mk I (A) (H00) Ignition Coil replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VAUXHALL Agila Mk I (A) (H00) Ignition Coil replacement - online guide
Tips & tricks for your VAUXHALL Agila Mk I (A) (H00)
View more
  • How to change Coil pack on VAUXHALL Agila Mk I (A) (H00) 1.2 16V Twinport - replacement tricks
    Car checks you need to carry out on your car after the winter | AUTODOC tips
    3K views
    Published on: 23/03/2023
  • Changing Ignition coil pack VAUXHALL AGILA Mk I (A) 1.0 12V - Replacement Tips
    How to detect vacuum leaks using a smoke machine | AUTODOC
    19K views
    Published on: 23/07/2020
  • Maintenance Hacks - VAUXHALL Agila Mk I (A) (H00) 1.2 16V Ignition coils replacement guide
    What to do if your check engine light is on | AUTODOC tips
    16K views
    Published on: 19/08/2020
  • Replace Coil packs on VAUXHALL AGILA Mk I (A) - free video tips
    Top 6 products for enhancing your car | AUTODOC tips
    3K views
    Published on: 18/11/2021

Most commonly replaced car parts on VAUXHALL AGILA

Professional manuals for the most common VAUXHALL models