Disclaimer
How to change ignition coil on VAUXHALL Astra Mk IV (G) CC (T98) – replacement guide
downloads:
3
Views:
19
Important!
This replacement procedure can be used for:
VAUXHALL Astra Mk IV (G) CC (T98) 1.4 16V Dualfuel (F08, F48), VAUXHALL Astra Mk IV (G) CC (T98) 1.6 Dualfuel (F08, F48), VAUXHALL Astra Mk IV (G) CC (T98) 1.6 16V (F08, F48), VAUXHALL Astra Mk IV (G) CC (T98) 1.4 16V (F08, F48) … View more
The steps may slightly vary depending on the car design.
VAUXHALL Astra Mk IV (G) CC (T98) 1.4 16V Dualfuel (F08, F48), VAUXHALL Astra Mk IV (G) CC (T98) 1.6 Dualfuel (F08, F48), VAUXHALL Astra Mk IV (G) CC (T98) 1.6 16V (F08, F48), VAUXHALL Astra Mk IV (G) CC (T98) 1.4 16V (F08, F48) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Ignition Coil for Astra Mk IV (G) CC (T98) and other VAUXHALL models
Alternative products

Electronic spray
Torque wrench
Torx bit T20
Torx bit T30
Ratchet wrench
Flat Screwdriver
Crow bar
Microfibre towel
Fender cover
Replacement: ignition coil – VAUXHALL ASTRA Mk IV (G) Hatchback. AUTODOC experts recommend:
- The replacement procedure is the same for the ignition coils of all cylinders.
- Please note: all work on the car – VAUXHALL ASTRA Mk IV (G) Hatchback – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Unscrew the fasteners of the air distribution housing assembly. Use Torx T20. - Step 4
Remove the air distribution housing assembly. - Step 5
Unscrew the engine cover fastener. Use Torx T30. Use a ratchet wrench. - Step 6
Unscrew the oil filler plug. - Step 7Remove the oil filler cap.Step 8
Cover the oil filler opening with a microfibre towel to prevent dirt and foreign objects from getting into the system. - Step 9
Remove the engine cover.AUTODOC recommends:Replacement: ignition coil – VAUXHALL ASTRA Mk IV (G) Hatchback. Do not use excessive force when removing the part as this may damage it. - Step 10
Remove the microfibre towel from the oil filler opening. - Step 11
Install the oil filler cap. - Step 12
Clean the ignition coil bolts. - Step 13
Detach the connector from the ignition coil. Use a flat screwdriver. - Step 14
Unscrew the ignition coil bolts. Use Torx T30. Use a ratchet wrench. - Step 15
Pry up the ignition coil. Use a crowbar. - Step 16
Take out the ignition coil from the spark plug well. - Step 17
Clean dirt, dust and debris from inside the spark plug wells. - Step 18
Install the new ignition coil to the spark plug well. Make sure you hear a click indicating that it is locked in place. - Step 19
Tighten the ignition coil bolts. Use Torx T30. Use a torque wrench. Tighten it to 7 nm torque. - Step 20
Treat the ignition coil connector with electronic spray. The spray will protect the electrical contacts from corrosion, oxidation, and will reduce the contact resistance.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VAUXHALL Astra Mk4 (G) CC (T98) model
Popular maintenance tutorials for Astra G T98
Complete guides for changing the Coil pack on different VAUXHALL ASTRA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VAUXHALL Astra Mk IV (G) CC (T98)
View more
5 mistakes when replacing consumables
DIY alternator repair | AUTODOC tips
Transform Your Car's Look: 6 Simple Accessories You Need to Try!
Top 5 reasons why the suspension knocks | AUTODOC tips
Most commonly replaced car parts on VAUXHALL ASTRA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

























