
Disclaimer
How to change ignition coil on MINI Convertible (R57) – replacement guide
downloads:
1
Views:
11
Important!
This replacement procedure can be used for:
MINI Convertible (R57) Cooper, MINI Convertible (R57) One, MINI Convertible (R57) Cooper S, MINI Convertible (R57) Cooper … View more
The steps may slightly vary depending on the car design.
MINI Convertible (R57) Cooper, MINI Convertible (R57) One, MINI Convertible (R57) Cooper S, MINI Convertible (R57) Cooper … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Ignition Coil for Convertible (R57) and other MINI models
Ignition coil
Alternative products

Electronic spray
High-temperature anti-seize lubricant
HEX bit no.H5.
Drive socket # 8
Ratchet wrench
Flat Screwdriver
Fender cover
Replacement: ignition coil – MINI MINI Convertible (R57). AUTODOC recommends:
- The replacement procedure is the same for the ignition coils of all cylinders.
- All work should be done with the engine stopped.
Replacement: ignition coil – MINI MINI Convertible (R57). Take the following steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Unscrew the fasteners of the cabin filter housing cover. Use a drive socket #8. Use a ratchet wrench.
- Step 4Remove the cabin filter housing cover.AUTODOC recommends:Replacement: ignition coil – MINI MINI Convertible (R57). Do not use excessive force when removing the part as this may damage it.
- Step 5Remove the wiper arm covers.
- Step 6Detach the connectors from the climate control sensors.
- Step 7Remove the climate control sensors.Step 8Unscrew the fasteners of the lower part of the scuttle panel. Use a drive socket #8. Use a ratchet wrench.
- Step 9Detach the cable duct from the upper part of the microfilter housing. Use a flat screwdriver.
- Step 10Remove the lower part of the scuttle panel.
- Step 11Unscrew the engine cover fastener. Use HEX No.H5. Use a ratchet wrench.
- Step 12Remove the engine cover.Replacement: ignition coil – MINI MINI Convertible (R57). Tip:Do not apply excessive force when removing the part. Otherwise you may damage it.
- Step 13Detach the connector from the ignition coil.
- Step 14Treat the ignition coil connector with electronic spray. The spray will protect the electrical contacts from corrosion, oxidation, and will reduce the contact resistance.
- Step 15Take out the ignition coil from the spark plug well.
- Step 16Treat the ignition coil tips. Use high-temperature grease. Use a flat screwdriver.
- Step 17Install the new ignition coil to the spark plug well. Make sure you hear a click indicating that it is locked in place.
- Step 18Plug in the ignition coil connector.
- Step 19Install the engine cover and secure it.Replacement: ignition coil – MINI MINI Convertible (R57). AUTODOC experts recommend:Make sure the engine cover is properly seated. It should not be displaced with respect to the guiding fasteners.Do not apply excessive force when installing the part. Otherwise you may damage the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the MINI Convertible (R57) model
Popular maintenance tutorials for Mini r57
Complete guides for changing the Coil pack on different MINI Cabrio models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your MINI Convertible (R57)
View more
- How do EGR valves work? | AUTODOC
- Kolbenschmidt plastic gauge overview
- #DIY Wheel Rim Restoration: Revive Scratches and Chips Easily!
- TOP 6 WD-40 lifehacks | AUTODOC tips
Most commonly replaced car parts on MINI Cabrio
Professional manuals for the most common MINI models
Time to replace parts? Get even better deals in our Shop app.

SCAN ME