Disclaimer
How to change ignition coil on AUDI TT Coupe (8J3) – replacement guide
downloads:
8
Views:
143
Important!
This replacement procedure can be used for:
AUDI TT Coupe (8J3) 2.5 RS quattro, AUDI TT Coupe (8J3) 2.0 TFSI quattro, AUDI TT Coupe (8J3) 2.0 TTS quattro, AUDI TT Coupe (8J3) 1.8 TFSI, AUDI TT Coupe (8J3) 2.0 TTS quattro, AUDI TT Coupe (8J3) 2.0 TFSI, AUDI TT Coupe (8J3) 2.5 RS quattro, AUDI TT Coupe (8J3) 2.0 TFSI quattro, AUDI TT Coupe (8J3) 2.0 TFSI … View more
The steps may slightly vary depending on the car design.
AUDI TT Coupe (8J3) 2.5 RS quattro, AUDI TT Coupe (8J3) 2.0 TFSI quattro, AUDI TT Coupe (8J3) 2.0 TTS quattro, AUDI TT Coupe (8J3) 1.8 TFSI, AUDI TT Coupe (8J3) 2.0 TTS quattro, AUDI TT Coupe (8J3) 2.0 TFSI, AUDI TT Coupe (8J3) 2.5 RS quattro, AUDI TT Coupe (8J3) 2.0 TFSI quattro, AUDI TT Coupe (8J3) 2.0 TFSI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Ignition Coil for TT Coupe (8J3) and other AUDI models
Ignition coil
Ignition coil
Ignition coil for TT Coupe (8J3) Petrol (265 hp)
Ignition coil for TT Coupe (8J3) Petrol (200 hp)
Ignition coil for TT Coupe (8J3) Petrol (340 hp)
High-temperature anti-seize lubricant
Electronic spray
Flat screwdriver
Crow bar
Fender cover
Replacement: ignition coil – AUDI TT (8J3). AUTODOC experts recommend:
- The replacement procedure is the same for the ignition coils of all cylinders.
- All work should be done with the engine stopped.
Replacement: ignition coil – AUDI TT (8J3). Recommended sequence of steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Remove the engine cover. - Step 4
Unplug the connectors from the ignition coils. - Step 5
Raise a little the wiring of the ignition coils and move it aside. - Step 6
Pry up the ignition coil. Use a crowbar. - Step 7
Take out the ignition coil from the spark plug well. - Step 8
Treat the ignition coil tip. Use high-temperature grease. Use a flat screwdriver. - Step 9
Install the new ignition coil to the spark plug well. Make sure you hear a click indicating that it is locked in place. - Step 10
Treat the ignition coil connector with electronic spray. The spray will protect the electrical contacts from corrosion, oxidation, and will reduce the contact resistance.Replacement: ignition coil – AUDI TT (8J3). AUTODOC recommends:After applying the spray, wait a few minutes.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the AUDI TT Coupe (8J3) model.
Popular maintenance tutorials for Audi TT 8J
Free download PDF
890.88 KB
Free download PDF1.17 MB
Free download PDF10.06 MB
Free download PDF3.21 MB
Free download PDF1.2 MB
Free download PDF604.16 KB
Complete guides for changing the Coil pack on different AUDI TT models
Free download PDF952.32 KB
Free download PDF1.98 MB
Free download PDF952.32 KB
Free download PDF952.32 KB
Free download PDF952.32 KB
Free download PDF952.32 KB
Your profile is your personal assistant.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- - scan the QR code
- - download from App Store
- - download from Google Play
Tips & tricks for your AUDI TT Coupe (8J3)
View more
5 common car washing mistakes | AUTODOC tips
How to swap the engine on a BMW E30 Turbo | SUPERCAR AUTODOC
How and why to check your oil | AUTODOC tips
How to remove scratches from a car | AUTODOC tips
