When to replace the Glow Plugs on your RENAULT MASTER
Recommended replacement interval for the part category Glow plug : 30000 km
Important!
This replacement procedure can be used for:
RENAULT MASTER II Bus (JD) 2.5 dCi, RENAULT MASTER II Bus (JD) 2.2 dCI View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Glow Plugs for MASTER II Bus (JD) and other RENAULT models
Alternative products
How to change Glow plug on Renault Master II Minibus 2.5 dCi – step-by-step instructions for straightforward car repair Glow plug
Tools
Replacement: glow plugs – RENAULT MASTER II Bus (JD). Tools you'll need:
WD-40 spray
Electronic spray
Ceramic grease
Torque wrench
7 mm socket
10 mm socket
10 mm glow plug socket
Ratchet wrench
Glow plug pliers
Fender cover
Replacement: glow plugs – RENAULT MASTER II Bus (JD). AUTODOC experts recommend:
  • The replacement procedure is identical for all glow plugs.
  • All the work should be carried out with the ignition switched off.
Replacement: glow plugs – RENAULT MASTER II Bus (JD). Use the following procedure:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to avoid damaging the paintwork and plastic parts of the car.
    Step 3
    How to change Glow Plugs on Renault Master II Minibus 1998 - free PDF and video manuals
    Loosen the clamp that connects the air intake hose to the mass air flow sensor. Use a 7 mm socket. Use a ratchet wrench.
  2. Step 4
    How to replace RENAULT MASTER II Bus (JD) 2.5 dCi 1999 Glow Plugs - step-by-step manuals and video guides
    Detach the air intake hose from the MAF sensor.
    Replacement: glow plugs – RENAULT MASTER II Bus (JD). Professionals recommend:
    Protect the MAF sensor and other air intake system components from contaminants getting in.
  3. Step 5
    Renault Master II Minibus 2.2 dCI 2000 Glow Plugs replacement: free workshop manuals
    Remove the air filter housing together with the air intake hose.
  4. Step 6
    Changing Glow Plugs on RENAULT MASTER II Bus (JD) 2.5 D 2001 by yourself
    Unscrew the coolant expansion tank fastener. Use a 10 mm socket. Use a ratchet wrench.
  5. Step 7
    How to remove RENAULT MASTER 1.9 dCi 2002 Glow Plugs - online easy-to-follow instructions
    Remove the fastening bolt.
  6. Step 8
    How to replace Glow Plugs on RENAULT MASTER II Bus (JD) 2003: download PDF manuals and video instructions
    Remove the coolant expansion tank.
  7. Step 9
    How hard is it to do yourself: Glow Plugs replacement on Renault Master II Minibus 2.5 dCi 2004 - download illustrated guide
    Detach the glow plug connectors.
  8. Step 10
    Need to know how to renew Glow Plugs on RENAULT MASTER 2005? This free workshop manual will help you to do it yourself
    Clean the glow plug wells. Use WD-40 spray.
  9. Step 11
    Changing of Glow Plugs on Renault Master II Minibus 2006 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the glow plugs. Use a 10 mm glow plug socket. Use a torque wrench. Use a ratchet wrench.
    Replacement: glow plugs – RENAULT MASTER II Bus (JD). Tip from AUTODOC:
    Glow plugs can get stuck over time and break apart when removed.Before unscrewing the parts, use a torque wrench to loosen them to avoid exceeding the breakaway torque specified by the car manufacturer.If you have reached the breakaway torque but the glow plugs still will not loosen up, you need to seek professional help: a glow plug fragment left inside the well or damage to the thread of the mounting seat can result in costly engine repairs.
  10. Step 12
    RENAULT MASTER 2.8 dTI Glow Plugs replacement: online guides and video tutorials
    Remove the glow plugs. Use glow plug pliers.
  11. Step 13
    Replacing Glow Plugs on Renault Master II Minibus 2008 2.5 dCi by yourself
    Treat the new glow plugs. Use ceramic grease.
  12. Step 14
    MASTER II Bus (JD) 1.9 dCi 2009 Glow Plugs DIY replacement workshop manual
    Install the new glow plugs into their mounting seats. Use glow plug pliers. Use a ratchet wrench.
  13. Step 15
    How to change Glow Plugs on RENAULT MASTER II Bus (JD) 2010 - tips and tricks
    Tighten the glow plugs. Use a 10 mm glow plug socket. Use a torque wrench. Tightening torque: 15 N·m.
    Replacement: glow plugs – RENAULT MASTER II Bus (JD). AUTODOC recommends:
    Don't use excessive force when tightening the glow plugs. Overtightening can damage the threaded connection. 
  14. Step 16
    Step-by-step recommendations for DIY replacement Renault Master II Minibus 1998 1.9 dCi Glow Plugs
    Treat the glow plug connectors. Use an electronic spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the RENAULT Master II Minibus model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY RENAULT MASTER II Bus (JD) Glow Plugs replacement - online guide
Tips & tricks for your RENAULT MASTER II Bus (JD)
View more
  • How to change Glow plug on RENAULT MASTER II Bus (JD) 2.8 dTI - replacement tricks
    How to Fix a Squealing Belt: Causes & Solutions | AUTODOC Expert Tips
  • Changing Heater plugs Renault Master II Minibus 2.5 dCi - Replacement Tips
    Easy Steps to Paint Brake Calipers Without Special Skills or High Costs
  • Maintenance Hacks - RENAULT MASTER II Bus (JD) 2.2 dCI Heater plug replacement guide
    Transform Your Engine Bay: Affordable Valve Cover Restoration with AUTODOC
  • Replace Diesel glow plugs on Renault Master II Minibus - free video tips
    How to Polish Your Car Yourself and Save Money on Garage Services | AUTODOC tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
RENAULT MASTER II Bus (JD) Glow Plugs replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME