
Disclaimer
How to change glow plugs on RENAULT Kadjar (HA_, HL_) – replacement guide
downloads:
46
Views:
772

Recommended replacement interval for the part category Glow plug : 30000 km
Important!
This replacement procedure can be used for:
RENAULT Kadjar (HA_, HL_) 1.5 dCi 110 (HLA3) … View more
The steps may slightly vary depending on the car design.
RENAULT Kadjar (HA_, HL_) 1.5 dCi 110 (HLA3) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Glow Plugs for Kadjar (HA_, HL_) and other RENAULT models
Glow plug
Alternative products

Injector & glow plug grease
Torque wrench
Drive socket # 10
Spark plug socket # 10
Ratchet wrench
Flat Screwdriver
Combination pliers
Crow bar
Microfibre towel
Fender cover
Replacement: glow plugs – RENAULT KADJAR. AUTODOC recommends:
- The replacement procedure is identical for all glow plugs.
- Before getting down to work, start the engine and let it warm up to operating temperature.
- Wear gloves to protect your hands from hot surfaces.
- All work should be done with the engine stopped.
Carry out replacement in the following order:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Disconnect the air intake pipe fastening. Use a drive socket #10. Use a ratchet wrench.
- Step 4Detach the air intake hose clamp. Use combination pliers. Use a crowbar.
- Step 5Remove the air intake pipe.
- Step 6Cover the air intake hose with a microfibre towel to prevent dust and dirt from getting into the system.
- Step 7Detach the engine wiring harness. Use a flat screwdriver.
- Step 8Unscrew the engine cover fastener. Use a drive socket #10. Use a ratchet wrench.
- Step 9Remove the engine cover.Replacement: glow plugs – RENAULT KADJAR. Tip from AUTODOC experts:Do not apply excessive force when removing the part. Otherwise you may damage it.
- Step 10Clean dirt, dust and debris from inside the spark plug wells.
- Step 11Detach the glow plug wiring connectors.
- Step 12Unscrew the glow plugs. Use the spark plug socket #10. Use a ratchet wrench.
- Step 13Remove the glow plugs.
- Step 14Treat the glow plugs. Use the injector & glow plug grease.Please note!Do not touch the heating element as fingerprints may cause malfunction.
- Step 15Install new glow plugs to their mounting seats.
- Step 16Tighten the glow plugs. Use the spark plug socket #10. Use a torque wrench. Tighten it to 15 nm torque.Replacement: glow plugs – RENAULT KADJAR. Tip from AUTODOC:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Comments –
2
- @user_361223616.05.2025 16:32MemberGood explanations!
- Graziana Venturi19.05.2025 10:03@user_3612236ModeratorThanks for your positive comment! Stay connected with us!
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Kadjar (HA_, HL_) model
Popular maintenance tutorials for RENAULT KADJAR
Complete guides for changing the Glow plug on different RENAULT KADJAR models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT Kadjar (HA_, HL_)
View more
- DIY manual gearbox restoration | Drivetrain restoration – Part 3
- Top 5 car noises you shouldn't ignore
- What to do if the ABS light comes on: DIY Diagnostics Tips
- Reviving Your Car: How to Start After Extended Idle Time | AUTODOC Tips
Most commonly replaced car parts on RENAULT KADJAR
Time to replace parts? Get even better deals in our Shop app.

SCAN ME