Important!
This replacement procedure can be used for:
RENAULT MASTER II Bus (JD) 1.9 dCi, RENAULT MASTER II Bus (JD) 2.5 dCi, RENAULT MASTER II Bus (JD) 2.2 dCI, RENAULT MASTER II Bus (JD) 2.8 dTI View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Expansion Tank for MASTER II Bus (JD) and other RENAULT models
Alternative products
How to change Coolant expansion tank on Renault Master II Minibus 2.5 dCi – step-by-step instructions for straightforward car repair Coolant expansion tank
Tools
Replacement: coolant expansion tank – RENAULT MASTER II Bus (JD). Tools you might need:
Electronic spray
Wire brush
Nylon brush
All-purpose cleaning spray
Paper towels
Torque wrench
13 mm combination spanner
7 mm socket
10 mm socket
12 mm socket
13 mm socket
T20 Torx bit
T30 Torx bit
T40 Torx bit
Ratchet wrench or power tool for removal/installation of threaded fasteners
Ratchet screwdriver
Combination pliers
Slotted screwdriver
Hose clamp pliers
Hose removal pliers
Funnel
Fluid drain pan
Cable ties
Replacement: coolant expansion tank – RENAULT MASTER II Bus (JD). AUTODOC recommends:
  • Follow the recommendations and requirements for part operation provided by the manufacturer.
  • All the work should be carried out with the engine cooled down and ignition switched off.
Replacement: coolant expansion tank – RENAULT MASTER II Bus (JD). Take the following steps:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to avoid damaging the paintwork and plastic parts of the car.
    Step 3
    Lift the vehicle using a vehicle lift or place it over an inspection pit.
    Step 4
    How to change Expansion Tank on Renault Master II Minibus 1998 - free PDF and video manuals
    Prepare a fluid drain pan.
  2. Step 5
    How to replace RENAULT MASTER II Bus (JD) 2.5 dCi 1999 Expansion Tank - step-by-step manuals and video guides
    Clean the area where the hose is connected to the oil cooler. Use a nylon brush. Use an all-purpose cleaning spray.
  3. Step 6
    Renault Master II Minibus 2.2 dCI 2000 Expansion Tank replacement: free workshop manuals
    Disconnect the hose from the oil cooler after releasing the hose clamp. Use combination pliers.
  4. Step 7
    Changing Expansion Tank on RENAULT MASTER II Bus (JD) 2.5 D 2001 by yourself
    Unscrew the coolant expansion tank cap.
    Replacement: coolant expansion tank – RENAULT MASTER II Bus (JD). Tip from AUTODOC experts:
    Wait until the coolant has completely flowed out of the hose.
  5. Step 8
    How to remove RENAULT MASTER 1.9 dCi 2002 Expansion Tank - online easy-to-follow instructions
    Clean the tip of the oil cooler where the hose attaches. Use an all-purpose cleaning spray.
  6. Step 9
    How to replace Expansion Tank on RENAULT MASTER II Bus (JD) 2003: download PDF manuals and video instructions
    Connect the hose to the oil cooler. Use combination pliers.
  7. Step 10
    Lower the vehicle.
    Step 11
    How hard is it to do yourself: Expansion Tank replacement on Renault Master II Minibus 2.5 dCi 2004 - download illustrated guide
    Disconnect the hoses from the expansion tank. Use hose clamp pliers. Use hose removal pliers.
    Caution!
    Block the hoses to stop contaminants from getting in.Use paper towels.
  8. Step 12
    Need to know how to renew Expansion Tank on RENAULT MASTER 2005? This free workshop manual will help you to do it yourself
    Unscrew the coolant expansion tank fastener. Use a 10 mm socket. Use a ratchet wrench.
  9. Step 13
    Changing of Expansion Tank on Renault Master II Minibus 2006 won't be an issue if you follow this illustrated step-by-step guide
    Remove the fastening bolt.
  10. Step 14
    RENAULT MASTER 2.8 dTI Expansion Tank replacement: online guides and video tutorials
    Remove the coolant expansion tank, releasing it from its bracket.
  11. Step 15
    Replacing Expansion Tank on Renault Master II Minibus 2008 2.5 dCi by yourself
    Install the new coolant expansion tank on its bracket until it clicks on.
  12. Step 16
    MASTER II Bus (JD) 1.9 dCi 2009 Expansion Tank DIY replacement workshop manual
    Install the fastening bolt.
  13. Step 17
    How to change Expansion Tank on RENAULT MASTER II Bus (JD) 2010 - tips and tricks
    Tighten the expansion tank fastener. Use a 10 mm socket. Use a ratchet wrench.
  14. Step 18
    Step-by-step recommendations for DIY replacement Renault Master II Minibus 1998 1.9 dCi Expansion Tank
    Clean the expansion tank hoses. Use an all-purpose cleaning spray. Remove the paper towels.
  15. Step 19
    DIY replacement of Expansion Tank on RENAULT MASTER II Bus (JD) 2.8 dTI 1999 is not an issue anymore with our step-by-step tutorial
    Connect the hoses to the expansion tank. Use hose clamp pliers.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the RENAULT Master II Minibus model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY RENAULT MASTER II Bus (JD) Expansion Tank replacement - online guide
Tips & tricks for your RENAULT MASTER II Bus (JD)
View more
  • How to change Coolant expansion tank on RENAULT MASTER II Bus (JD) 2.8 dTI - replacement tricks
    DIY alternator repair | AUTODOC tips
  • Changing Coolant reservoir Renault Master II Minibus 2.5 dCi - Replacement Tips
    How to Prevent Premature Wear on Your Car Boot Damper | AUTODOC
  • Maintenance Hacks - RENAULT MASTER II Bus (JD) 2.2 dCI Coolant tank replacement guide
    What causes engine misfire? | AUTODOC
  • Replace Water tank radiator on Renault Master II Minibus - free video tips
    Top 5 mistakes when replacing spark plugs | AUTODOC tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
RENAULT MASTER II Bus (JD) Expansion Tank replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME