During installation, take care to prevent dust and dirt from getting into the fuel filter housing.Take care to only use quality filters.
Step 12
Attach the fuel pressure sensor connector.
Step 13
Connect the fuel supply lines to the fuel filter.
Step 14
Screw the fixing bolts of the fuel filter bracket. Use a drive socket #8. Use a drive socket #10. Use a ratchet wrench.
Step 15
Install the engine cover and secure it.
AUTODOC recommends:
Make sure the engine cover is properly seated. It should not be displaced with respect to the guiding fasteners.Caution! Do not use excessive force during installation. This may damage the fasteners of the car. Volvo V50 MW
Step 16
Screw in the engine cover fasteners. Use a drive socket #10.
Replacement: fuel filter – Volvo V50 MW. Tip from AUTODOC:
Before starting off, switch the ignition on and off several times. This should be done to activate the fuel pump to make it pump fuel through the fuel system.
Step 17
Run the engine for a few minutes. This is necessary in order to make sure that the component operates properly.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your VOLVO V50 (545)
View more
TOP 6 WD-40 lifehacks | AUTODOC tips
How to Make a DIY Foam Sprayer | AUTODOC tips
How to replace the suspension on a BMW E30 Turbo | SUPERCAR AUTODOC