Disclaimer
How to change fuel filter on TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_) – replacement guide
downloads:
28
Views:
606
Recommended replacement interval for the part category Fuel filter : 4 year / 60000 km
Important!
This replacement procedure can be used for:
TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_) 2.0 D-4D (CDE120R_, CDE120L_), TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_) 2.0 D-4D (CDE120R_, CDE120L_) … View more
The steps may slightly vary depending on the car design.
TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_) 2.0 D-4D (CDE120R_, CDE120L_), TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_) 2.0 D-4D (CDE120R_, CDE120L_) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Fuel Filter for COROLLA (ZZE12_, NDE12_, ZDE12_) and other TOYOTA models
Alternative products

All-purpose cleaning spray
Drive socket # 8
Drive socket # 12
Ratchet wrench
Torque wrench
Vice
Round-nose pliers
Flat Screwdriver
Oil filter wrench
Fender cover
Replacement: fuel filter – TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_). AUTODOC experts recommend:
- Ensure adequate ventilation of the workplace. Fuel vapors are poisonous.
- All work should be done with the engine stopped.
Replacement: fuel filter – TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_). Recommended sequence of steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Detach the connector of the water-in-fuel sensor. - Step 4
Loosen the fastening clamps of the fuel filter pipes. Use round-nose pliers. - Step 5
Detach the tubes from the fuel filter.Replacement: fuel filter – TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_). Tip:Be careful! Fuel may leak from the filter housing and hoses. - Step 6
Loosen the fuel filter mounting. Use a drive socket #12. Use a ratchet wrench. - Step 7
Remove the fuel filter. Put the old filter cartridge in the container. - Step 8
Unscrew the bracket of the water-in-fuel sensor. Use a drive socket #8. - Step 9
Remove the rubber strip. - Step 10
Unscrew the water-in-fuel sensor. - Step 11
Wait until the fuel is completely drained from the fuel filter. - Step 12
Unscrew the clamps of the fuel filter protective case. Use a drive socket #8. - Step 13
Remove the protective case of the fuel filter. - Step 14
Grip the fuel filter cover with the old cartridge in a vice. - Step 15
Unscrew the cartridge. - Step 16
Clean the mounting seat of the cartridge. - Step 17
Screw in the new cartridge. Use an oil filter wrench. Use a torque wrench. Tighten it to 14 Nm torque.AUTODOC recommends:Take care to only use quality filters.During installation, take care to prevent dust and dirt from getting into the fuel filter housing. - Step 18
Loosen the vice and take out the fuel filter assembly. - Step 19
Install the fuel filter protective case. - Step 20
Tighten the clamps of the fuel filter protective case. Use a drive socket #8. - Step 21
Remove the O-ring of the water-in-fuel sensor. Use a flat screwdriver.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the TOYOTA Corolla IX Hatchback (E120) model
Popular maintenance tutorials for Toyota Corolla E120
Complete guides for changing the Fuel filters on different TOYOTA COROLLA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_)
View more
Unveiling the secrets: Detecting vacuum leaks with a Smoke Machine | AUTODOC
TOP 5 mistakes during DIY oil change | AUTODOC tips
Top 5 reasons why the suspension knocks | AUTODOC tips
5 possible reasons why your car heater isn't working
Most commonly replaced car parts on TOYOTA COROLLA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME



























