Disclaimer
How to change fuel filter on PEUGEOT 206 SW (2E/K) – replacement guide
downloads:
9
Views:
266
Recommended replacement interval for the part category Fuel filter : 60000 km
Important!
This replacement procedure can be used for:
PEUGEOT 206 SW (2E/K) 2.0 HDi … View more
The steps may slightly vary depending on the car design.
PEUGEOT 206 SW (2E/K) 2.0 HDi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Fuel Filter for 206 SW (2E/K) and other PEUGEOT models
Alternative products

All-purpose cleaning spray
Drive socket # 10
Chain oil filter wrench
Flat Screwdriver
Crow bar
Fender cover
Replacement: fuel filter – PEUGEOT 206 SW (2E/K). Tip from AUTODOC experts:
- Ensure adequate ventilation of the workplace. Fuel vapors are poisonous.
- Warning! Shut down the engine before starting any work – PEUGEOT 206 SW (2E/K)
Carry out replacement in the following order:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Unscrew the engine cover fastener. Use a drive socket #10. - Step 4
Remove the engine cover. - Step 5
Clean the fuel filter. Use all-purpose cleaning spray. - Step 6
Detach the fuel pressure sensor connector. Use a crowbar. - Step 7
Disconnect the fuel supply lines from the fuel filter. Use a crowbar.Replacement: fuel filter – PEUGEOT 206 SW (2E/K). AUTODOC recommends:Be careful! Fuel may leak from the filter housing and hoses. - Step 8
Loosen the fuel filter mounting. Use a chain oil filter wrench. - Step 9
Remove the fuel filter. Put the old filter cartridge in the container. - Step 10
Detach the old filter cartridge from the filter housing cover. Use a crowbar. - Step 11
Clean the fuel filter housing and the cover. Use all-purpose cleaning spray. - Step 12
Fasten the fuel filter in the holder.Replacement: fuel filter – PEUGEOT 206 SW (2E/K). Tip from AUTODOC experts:Make sure that the fuel filter is positioned correctly. Consider the fuel flow direction mark.During installation, take care to prevent dust and dirt from getting into the fuel filter housing.PEUGEOT 206 SW (2E/K) – It's important to only use high-quality filters. - Step 13
Remove the rubber strip. Use a flat screwdriver. - Step 14
Install the rubber strip.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the PEUGEOT 206 SW (2E/K) model
Popular maintenance tutorials for Peugeot 206 SW
Complete guides for changing the Fuel filters on different PEUGEOT 206 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your PEUGEOT 206 SW (2E/K)
View more
How to tell if a tie rod is faulty
5 easy car repairs you can do without a garage visit
Top 4 Car Cleaning Products to Protect Your Car's Body | AUTODOC Tips
#DIY Wheel Rim Restoration: Revive Scratches and Chips Easily!
Most commonly replaced car parts on PEUGEOT 206
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

























