Important!
This replacement procedure can be used for:
RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.2 (BB0A, BB0F, BB10, BB1K, BB28, BB2D, BB2H, CB0A,..., RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.4 (B/CB0C, B/CB0S), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.6 (B/CB0D, BB00), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.6 16V (BB01, BB0H, BB0T, BB14, BB1D, BB1R, BB2KL, BB3G..., RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.9 D (B/CB0E, BB0J), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.4 16V (B/CB0L), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.9 dTi (B/CB0U), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.4 16V (B/CB0P, BB13), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.2 16V (BB05, BB0W, BB11, BB27, BB2T, BB2U, BB2V, CB05,..., RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.5 dCi (B/CB07), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.5 dCi (B/CB08), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.5 dCi, RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.0, RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.9 D (B/CB0J), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.5 dCi (B/CB03), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.5 dCi (B/C2J), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.5 dCi (B/CB3M), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.5 dCi (BB3N, CB3N) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Strut Mount for CLIO II (BB0/1/2_, CB0/1/2_) and other RENAULT models
Alternative products
How to change Repair kit, suspension strut on Renault Clio 2 1.2 (BB0A, BB0F, BB10, BB1K, BB28, BB2D, BB2H, CB0A,... – step-by-step instructions for straightforward car repair Repair kit, suspension strut
Tools
Replacement: strut mount – RENAULT CLIO II (BB0/1/2_, CB0/1/2_). Tools you need:
Wire brush
WD-40 spray
Copper grease
Combination spanner #14
Combination spanner #19
Combination spanner #21
Drive socket # 21
HEX bit No.H6.
Wheel impact socket #19
Pin punch
Hammer
Tap wrench
Ratchet wrench
Torque wrench
Crow bar
Hydraulic transmission jack
Hydraulic strut spring compressor
Fender cover
Wheel chock
Replacement: strut mount – RENAULT CLIO II (BB0/1/2_, CB0/1/2_). AUTODOC recommends:
  • All mounts of the front shock struts should be replaced simultaneously.
  • The replacement procedure is identical for the mounts of the left and right shock struts of the front suspension.
  • Be sure to replace all self-locking nuts and bolts during installation.
  • All work should be done with the engine stopped.
Replacement: strut mount – RENAULT CLIO II (BB0/1/2_, CB0/1/2_). Recommended sequence of steps:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Strut Mount on Renault Clio 2 1998 - free PDF and video manuals
    Remove the shock strut mount cap. Use a crowbar.
  2. Step 4
    How to replace RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.2 (BB0A, BB0F, BB10, BB1K, BB28, BB2D, BB2H, CB0A,... 1999 Strut Mount - step-by-step manuals and video guides
    Loosen the upper fastener of the shock strut mount. Use a combination spanner #21. Use HEX No.H6. Use a ratchet wrench.
  3. Step 5
    Renault Clio 2 1.2 16V (BB05, BB0W, BB11, BB27, BB2T, BB2U, BB2V, CB05,... 2000 Strut Mount replacement: free workshop manuals
    Secure the wheels with chocks.
  4. Step 6
    Changing Strut Mount on RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.4 16V (B/CB0P, BB13) 2001 by yourself
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  5. Step 7
    Raise the front of the car and secure on supports.
    Step 8
    How to remove RENAULT CLIO 1.4 (B/CB0C, B/CB0S) 2002 Strut Mount - online easy-to-follow instructions
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. RENAULT CLIO II (BB0/1/2_, CB0/1/2_)
  6. Step 9
    How to replace Strut Mount on RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 2003: download PDF manuals and video instructions
    Remove the wheel.
  7. Step 10
    How hard is it to do yourself: Strut Mount replacement on Renault Clio 2 1.6 16V (BB01, BB0H, BB0T, BB14, BB1D, BB1R, BB2KL, BB3G... 2004 - download illustrated guide
    Clean the shock strut fasteners. Use a wire brush. Use WD-40 spray.
  8. Step 11
    Need to know how to renew Strut Mount on RENAULT CLIO 2005? This free workshop manual will help you to do it yourself
    Unscrew the lower fastener connecting the shock strut to the steering knuckle. Use a drive socket #21. Use a combination spanner #21. Use a tap wrench.
  9. Step 12
    Changing of Strut Mount on Renault Clio 2 2006 won't be an issue if you follow this illustrated step-by-step guide
    Prop up the steering knuckle. Use a hydraulic transmission jack.
  10. Step 13
    RENAULT CLIO 1.2 (BB0A, BB0F, BB10, BB1K, BB28, BB2D, BB2H, CB0A,... Strut Mount replacement: online guides and video tutorials
    Remove the fastening bolts (2 pieces). Use a hammer. Use a pin punch.
  11. Step 14
    Replacing Strut Mount on Renault Clio 2 2008 1.2 (BB0A, BB0F, BB10, BB1K, BB28, BB2D, BB2H, CB0A,... by yourself
    Unscrew the upper fastening of the shock absorber strut. Use a drive socket #21.
    Replacement: strut mount – RENAULT CLIO II (BB0/1/2_, CB0/1/2_). Tip:
    To avoid injuries, hold the shock strut when undoing the fastening bolts.
  12. Step 15
    CLIO II (BB0/1/2_, CB0/1/2_) 1.4 (B/CB0C, B/CB0S) 2009 Strut Mount DIY replacement workshop manual
    Remove the suspension strut.
  13. Step 16
    How to change Strut Mount on RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 2010 - tips and tricks
    Set the shock absorber strut on the spring compressor tool.
    Replacement: strut mount – RENAULT CLIO II (BB0/1/2_, CB0/1/2_). Tip from AUTODOC experts:
    Note that when using a spring compressor, spring coils need to be securely gripped, compressing the spring on the opposite sides.Ensure the correct position of the spring in the retainer.Make sure that the spring coils tightly entered the lock handles.
  14. Step 17
    Step-by-step recommendations for DIY replacement Renault Clio 2 2011 1.4 (B/CB0C, B/CB0S) Strut Mount
    Compress the spring.
  15. Step 18
    DIY replacement of Strut Mount on RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.5 dCi 2012 is not an issue anymore with our step-by-step tutorial
    Remove the strut piston rod nut. Use HEX No.H6. Use a combination spanner #14. Use a ratchet wrench.
  16. Step 19
    How to change Strut Mount on Renault Clio 2 1998 - free PDF and video manuals
    Remove the top strut mount.
  17. Step 20
    How to replace RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.2 (BB0A, BB0F, BB10, BB1K, BB28, BB2D, BB2H, CB0A,... 1999 Strut Mount - step-by-step manuals and video guides
    Install a new top shock strut mount.
  18. Step 21
    Renault Clio 2 1.2 16V (BB05, BB0W, BB11, BB27, BB2T, BB2U, BB2V, CB05,... 2000 Strut Mount replacement: free workshop manuals
    Tighten the shock strut piston rod nut. Use HEX No.H6. Use a combination spanner #14. Use a torque wrench. Tighten it to 60 Nm torque.
    AUTODOC recommends:
    Check to make sure the spring is positioned correctly. Avoid its misalignment.
  19. Step 22
    Changing Strut Mount on RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.4 16V (B/CB0P, BB13) 2001 by yourself
    Decompress the spring.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the RENAULT Clio II Hatchback (BB, CB) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY RENAULT CLIO II (BB0/1/2_, CB0/1/2_) Strut Mount replacement - online guide
Tips & tricks for your RENAULT CLIO II (BB0/1/2_, CB0/1/2_)
View more
  • How to change Strut mount on RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.5 dCi - replacement tricks
    Don’t Replace, Restore: Fixing Damaged Threads at Home
  • Changing Top mount Renault Clio 2 1.2 (BB0A, BB0F, BB10, BB1K, BB28, BB2D, BB2H, CB0A,... - Replacement Tips
    How to choose the right engine oil for your car | AUTODOC
  • Maintenance Hacks - RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.2 16V (BB05, BB0W, BB11, BB27, BB2T, BB2U, BB2V, CB05,... Top strut mount replacement guide
    How to Use Sandblasting Equipment: Step-by-Step Guide | AUTODOC Tips
  • Replace Top mounts on Renault Clio 2 - free video tips
    Save Money on Fuel with These Easy Tips | AUTODOC
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
RENAULT CLIO II (BB0/1/2_, CB0/1/2_) Strut Mount replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME