Disclaimer
How to change front lower arm on VW Fox Hatchback (5Z1, 5Z3, 5Z4) – replacement guide
downloads:
15
Views:
124
Important!
This replacement procedure can be used for:
VW Fox Hatchback (5Z1, 5Z3, 5Z4) 1.4 TDI, VW Fox Hatchback (5Z1, 5Z3, 5Z4) 1.4, VW Fox Hatchback (5Z1, 5Z3, 5Z4) 1.2 … View more
The steps may slightly vary depending on the car design.
VW Fox Hatchback (5Z1, 5Z3, 5Z4) 1.4 TDI, VW Fox Hatchback (5Z1, 5Z3, 5Z4) 1.4, VW Fox Hatchback (5Z1, 5Z3, 5Z4) 1.2 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Control Arm for Fox Hatchback (5Z1, 5Z3, 5Z4) and other VW models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Drive socket # 13
Drive socket # 18
Wheel impact socket #17
Ratchet wrench
Torque wrench
Tap wrench
Crow bar
Hydraulic transmission jack
Wheel chock
Replacement: front lower arm – VW FOX (5Z1, 5Z3). AUTODOC experts recommend:
- The replacement procedure is identical for the left and right lower control arms.
- All work should be done with the engine stopped.
Replacement: front lower arm – VW FOX (5Z1, 5Z3). Take the following steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VW FOX (5Z1, 5Z3) - Step 5
Remove the wheel. - Step 6
Clean all joints of the arm. Use a wire brush. Use WD-40 spray.Replacement: front lower arm – VW FOX (5Z1, 5Z3). Tip from AUTODOC:After applying the spray, wait a few minutes.Wear protective goggles. - Step 7
Unscrew the front arm fastener. Use a drive socket #18. Use a tap wrench. - Step 8
Unscrew the fastener connecting the ball joint to the suspension control arm. Use a drive socket #13. Use a tap wrench. - Step 9
Disconnect the spherical joint from the arm. - Step 10
Remove the front fastener of the control arm. Use a drive socket #18. - Step 11
Clean all joints of the arm. Use WD-40 spray. - Step 12
Remove the arm. Use a crowbar. - Step 13
Clean the mounting seats and the thread of the suspension arm. Use a wire brush. Use WD-40 spray. - Step 14
Install a new arm. Use a crowbar.Replacement: front lower arm – VW FOX (5Z1, 5Z3). AUTODOC experts recommend:During the installation process, use only new bolts and nuts.Do not damage the ball joint cover. - Step 15
Install the front fastener of the arm. Use a drive socket #18. - Step 16
Attach the ball joint to the control arm.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Fox Hatchback (5Z1, 5Z3, 5Z4) model
Popular maintenance tutorials for VW Fox 5z1
Complete guides for changing the Control arm on different VW FOX models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW Fox Hatchback (5Z1, 5Z3, 5Z4)
View more
Can You Hear Your Brakes Squeaking? Learn the Causes and DIY Solutions! | AUTODOC Tips
Transform Your Car's Look: 6 Simple Accessories You Need to Try!
The Ultimate Guide to Engine Bay Cleaning | AUTODOC
How to Make a DIY Foam Sprayer | AUTODOC tips
Most commonly replaced car parts on VW FOX
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





























