How to carry out replacement: Control Arm 2.0 TDI Seat Exeo Saloon
Disclaimer
Change Seat Exeo Saloon 1.8 TSI Control Arm yourself – manuals and video tutorials

How to change front lower arm on SEAT Exeo Saloon (3R2) – replacement guide

downloads: 2
Views: 25
Download your free tutorial and fix SEAT Exeo Saloon (3R2) 2.0 TFSI problems yourself Download for free 1.74 MB Control Arm for Seat Exeo Saloon Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
SEAT Exeo Saloon (3R2) 1.6, SEAT Exeo Saloon (3R2) 1.8 T, SEAT Exeo Saloon (3R2) 2.0 TFSI, SEAT Exeo Saloon (3R2) 2.0 TDI, SEAT Exeo Saloon (3R2) 2.0 TDI, SEAT Exeo Saloon (3R2) 2.0 TDI … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Control Arm for Exeo Saloon (3R2) and other SEAT models
Alternative products
How to change Suspension arm on Seat Exeo Saloon 2.0 TDI – step-by-step instructions for straightforward car repair Suspension arm
Tools
Replacement: front lower arm – SEAT EXEO (3R2). List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #18
Drive socket # 18
Wheel impact socket #17
Ball joint puller
Hydraulic transmission jack
Wheel chock
Buy tools
Replacement: front lower arm – SEAT EXEO (3R2). Professionals recommend:
  • The replacement procedure is identical for the left and right lower control arms.
  • Please note: all work on the car – SEAT EXEO (3R2) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Control Arm on Seat Exeo Saloon 2008 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    How to replace SEAT Exeo Saloon (3R2) 2.0 TDI 2009 Control Arm - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    Replacement: front lower arm – SEAT EXEO (3R2). Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  3. Step 5
    Seat Exeo Saloon 1.8 T 2010 Control Arm replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Control Arm on SEAT Exeo Saloon (3R2) 1.8 TSI 2011 by yourself
    Clean all joints of the arm. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove SEAT EXEO 1.6 2012 Control Arm - online easy-to-follow instructions
    Unscrew the ball joint fastening to the steering knuckle. Use a combination spanner #18.
  6. Step 8
    How to replace Control Arm on SEAT Exeo Saloon (3R2) 2013: download PDF manuals and video instructions
    Unscrew the rear fastener connecting the control arm to the subframe. Use a combination spanner #18 (2 pieces).
  7. Step 9
    How hard is it to do yourself: Control Arm replacement on Seat Exeo Saloon 1.8 T 2014 - download illustrated guide
    Disconnect the ball joint from the steering knuckle. Use a ball joint puller.
  8. Step 10
    Need to know how to renew Control Arm on SEAT EXEO 2015? This free workshop manual will help you to do it yourself
    Remove the fastening bolt.
  9. Step 11
    Changing of Control Arm on Seat Exeo Saloon 2016 won't be an issue if you follow this illustrated step-by-step guide
    Remove the arm.
  10. Step 12
    SEAT EXEO 1.8 TSI Control Arm replacement: online guides and video tutorials
    Clean the mounting seats and the thread of the suspension arm. Use a wire brush. Use WD-40 spray.
  11. Step 13
    Replacing Control Arm on Seat Exeo Saloon 2018 2.0 TDI by yourself
    Install a new arm.
  12. Step 14
    Exeo Saloon (3R2) 1.6 2019 Control Arm DIY replacement workshop manual
    Connect the ball joint to the steering knuckle.
  13. Step 15
    Install the fastening bolt.
    Step 16
    How to change Control Arm on SEAT Exeo Saloon (3R2) 2020 - tips and tricks
    Screw the fasteners of the ball joint. Use a combination spanner #18.
  14. Step 17
    Step-by-step recommendations for DIY replacement Seat Exeo Saloon 2021 1.6 Control Arm
    Screw the rear arm fastener. Use a combination spanner #18 (2 pieces).
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the SEAT Exeo Saloon (3R2) model

Seat Exeo Saloon tyre size

Popular maintenance tutorials for Seat Exeo Saloon

More manuals for Seat Exeo Saloon

Complete guides for changing the Control arm on different SEAT EXEO models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY SEAT Exeo Saloon (3R2) Control Arm replacement - online guide
Tips & tricks for your SEAT Exeo Saloon (3R2)
View more
  • How to change Control arm on SEAT Exeo Saloon (3R2) 2.0 TFSI - replacement tricks
    Understanding Car Tools: The Key Differences You Need to Know | AUTODOC tips
    8K views
    Published on: 16/12/2021
  • Changing Wishbone Seat Exeo Saloon 2.0 TDI - Replacement Tips
    5 causes of turbocharger failure and how to avoid them
    13K views
    Published on: 04/04/2024
  • Maintenance Hacks - SEAT Exeo Saloon (3R2) 1.8 T Control arms replacement guide
    What to do if the ABS light comes on: DIY Diagnostics Tips
    8K views
    Published on: 11/03/2021
  • Replace Trailing arm on Seat Exeo Saloon - free video tips
    Top 5 reasons why your car squeals | AUTODOC Tips
    9K views
    Published on: 26/10/2023

Most commonly replaced car parts on SEAT EXEO

Professional manuals for the most common SEAT models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
SEAT Exeo Saloon (3R2) Control Arm replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME