Disclaimer
How to change front coil springs on Renault Clio 2 – replacement guide
downloads:
13
Views:
262
Important!
This replacement procedure can be used for:
RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.2 (BB0A, BB0F, BB10, BB1K, BB28, BB2D, BB2H, CB0A,..., RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.4 (B/CB0C, B/CB0S), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.6 (B/CB0D, BB00), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.6 16V (BB01, BB0H, BB0T, BB14, BB1D, BB1R, BB2KL, BB3G..., RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.9 D (B/CB0E, BB0J), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 2.0 16V Sport (CB0M), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.4 16V (B/CB0L), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.9 dTi (B/CB0U), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.4 16V (B/CB0P, BB13), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.5 dCi (B/CB07), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.5 dCi (B/CB08), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.5 dCi, RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 2.0 16V Sport, RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.9 D (B/CB0J), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.2, RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.5 dCi (B/CB03), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.2 LPG (BB0A, CB0A), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.5 dCi (B/CB3M), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.5 dCi (BB3N, CB3N) … View more
The steps may slightly vary depending on the car design.
RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.2 (BB0A, BB0F, BB10, BB1K, BB28, BB2D, BB2H, CB0A,..., RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.4 (B/CB0C, B/CB0S), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.6 (B/CB0D, BB00), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.6 16V (BB01, BB0H, BB0T, BB14, BB1D, BB1R, BB2KL, BB3G..., RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.9 D (B/CB0E, BB0J), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 2.0 16V Sport (CB0M), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.4 16V (B/CB0L), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.9 dTi (B/CB0U), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.4 16V (B/CB0P, BB13), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.5 dCi (B/CB07), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.5 dCi (B/CB08), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.5 dCi, RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 2.0 16V Sport, RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.9 D (B/CB0J), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.2, RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.5 dCi (B/CB03), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.2 LPG (BB0A, CB0A), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.5 dCi (B/CB3M), RENAULT CLIO II (BB0/1/2_, CB0/1/2_) 1.5 dCi (BB3N, CB3N) … View more
The steps may slightly vary depending on the car design.
How to change front springs / front coil springs on RENAULT CLIO 2 (C65) [TUTORIAL AUTODOC]

All the parts you need to replace – Springs for CLIO II (BB0/1/2_, CB0/1/2_) and other RENAULT models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #18
Combination spanner #21
Drive socket # 10
Drive socket # 17
Drive socket # 18
Drive socket # 21
HEX bit no.H6.
Wheel impact socket #19
Ratchet wrench
Torque wrench
Hydraulic strut spring compressor
Tap wrench
Fender cover
Wheel chock
Replacement: coil springs – Renault Clio 2. Tip from AUTODOC:
- Both coil springs of the front suspension should be replaced simultaneously.
- The replacement procedure is identical for the left and right coil springs of the front suspension.
- Please note: all work on the car – Renault Clio 2 – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1
Open the bonnet. - Step 2
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car. - Step 3
Clean the fasteners of the shock strut upper mount. Use a wire brush. Use WD-40 spray. - Step 4
Loosen the upper fastener of the shock strut mount. Use HEX No.H6. Use a combination spanner #21. Use a ratchet wrench. - Step 5
Secure the wheels with chocks. - Step 6
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 7
Raise the front of the car and secure on supports. - Step 8
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. Renault Clio 2 - Step 9
Remove the wheel. - Step 10
Clean the fasteners connecting the shock strut to the steering knuckle. Use a wire brush. Use WD-40 spray. - Step 11
Unscrew the lower fastener connecting the shock strut to the steering knuckle. Use a combination spanner #18. Use a drive socket #18. Use a tap wrench. - Step 12
Unscrew the ABS cable holder. Use a drive socket #10. Use a ratchet wrench. - Step 13
Remove the fastening bolts. - Step 14
Disconnect the steering knuckle from the shock absorber strut. Use a combination spanner #18. - Step 15
Unscrew the top fastening of the shock strut mount. Use a drive socket #21.AUTODOC recommends:Important! Hold the suspension strut while unscrewing the fastening bolts. Renault Clio 2 - Step 16
Remove the suspension strut. - Step 17
Set the shock absorber strut on the spring compressor tool.Replacement: coil springs – Renault Clio 2. Professionals recommend:Note that when using a spring compressor, spring coils need to be securely gripped, compressing the spring on the opposite sides.Ensure the correct position of the spring in the retainer.Make sure that the spring coils tightly entered the lock handles. - Step 18
Compress the spring. - Step 19Treat the shock strut rod. Use WD-40 spray.Step 20
Remove the strut piston rod nut. Use a drive socket #17. Use HEX No.H6. Use a ratchet wrench. - Step 21
Remove the top strut mount. - Step 22
Remove the shock absorber dust cap and the bump stop.AUTODOC recommends:Replacement: coil springs – Renault Clio 2. Carefully inspect the mount, the boot, and the bump stop of the shock absorber. Replace if necessary. - Step 23
Release the coil spring. - Step 24
Remove the spring. - Step 25
Install the boot and a bump stop onto the shock absorber. - Step 26
Install the spring on the shock absorber. - Step 27
Compress the spring. - Step 28
Install the upper strut mount and the strut mount bearing. - Step 29
Tighten the shock strut piston rod nut. Use a drive socket #17. Use HEX No.H6. Use a torque wrench. Tighten it to 21 Nm torque.Replacement: coil springs – Renault Clio 2. Tip from AUTODOC experts:Check to make sure the spring is positioned correctly. Avoid its misalignment. - Step 30
Decompress the spring.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 1
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Clio II Hatchback (BB, CB) model
Popular maintenance tutorials for Renault Clio 2
Complete guides for changing the Springs on different RENAULT CLIO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT CLIO II (BB0/1/2_, CB0/1/2_)
View more
How to get your motorcycle ready for spring
How to make an injector test bench yourself
5 Ways You’re Scrubbing Your Car Wrong | AUTODOC Tips
Don’t Replace, Restore: Fixing Damaged Threads at Home
Most commonly replaced car parts on RENAULT CLIO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME



































