Recommended replacement interval for the part category Brake pad set : 30000 km

Important!

This replacement procedure can be used for:
FORD C-MAX (DM2) 1.8, FORD C-MAX (DM2) 2.0 TDCi, FORD C-MAX (DM2) 1.6 TDCi, FORD C-MAX (DM2) 1.6, FORD C-MAX (DM2) 1.8, FORD C-MAX (DM2) 1.8 Flexifuel, FORD C-MAX (DM2) 2.0, FORD C-MAX (DM2) 1.6 TDCi, FORD C-MAX (DM2) 1.6 TDCi, FORD C-MAX (DM2) 2.0 TDCi, FORD C-MAX (DM2) 2.0 TDCi, FORD C-MAX (DM2) 1.8 TDCi, FORD C-MAX (DM2) 2.0 CNG, FORD C-MAX (DM2) 2.0 LPG, FORD C-MAX (DM2) 1.6 … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Brake Pads for C-MAX (DM2) and other FORD models

Alternative products

Brake pad set

Replacement: brake pads – FORD C-MAX (DM2). List of the tools you'll need:

                      Wire brush
                    
                      Brake cleaner 
                    
                      Anti-squeal paste
                    
                      Copper grease 
                    
                      HEX bit No.H7.
                    
                      Wheel impact socket #19
                    
                      Ratchet wrench
                    
                      Torque wrench
                    
                      Brake caliper wind back tool
                    
                      Crow bar
                    
                      Wheel chock

Buy tools

Replacement: brake pads – FORD C-MAX (DM2). AUTODOC experts recommend:

Perform the replacement of brake pads in complete set for each axis. This provides effective braking.
The replacement procedure is identical for all brake pads on the same axle.
All work should be done with the engine stopped.

Replacement: brake pads – FORD C-MAX (DM2). Use the following procedure:

Step 1

Open the bonnet. Unscrew the brake fluid reservoir cap.

Step 2

Secure the wheels with chocks.
Step 3

Loosen the wheel mounting bolts. Use wheel impact socket #19.
Step 4

Raise the front of the car and secure on supports.

Step 5

Unscrew the wheel bolts.

AUTODOC recommends:
Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. FORD C-MAX (DM2)
Step 6

Remove the wheel.
Step 7

Spread the brake pads. Use a crowbar.
Step 8

Detach the brake caliper retaining spring. Use a crowbar.
Step 9

Remove the dust boot caps of the brake caliper guide pins.
Step 10

Unscrew the brake caliper fastening. Use HEX No.H7. Use a ratchet wrench.
Step 11

Remove the brake caliper.

Replacement: brake pads – FORD C-MAX (DM2). AUTODOC recommends:
Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur.
Step 12

Remove the brake pads.

Replacement: brake pads – FORD C-MAX (DM2). Tip:
Measure the brake disc thickness. Upon reaching the wear limit the part must be replaced.
Step 13

Press in the brake caliper piston. Use brake caliper wind back tool.
Step 14

Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary. Use a wire brush. Use a brake cleaner.

AUTODOC recommends:
Replacement: brake pads – FORD C-MAX (DM2). After applying the spray, wait a few minutes.
Step 15

Treat the back side of the new brake pads. Treat the brake caliper bracket. Use anti-squeal paste.

Replacement: brake pads – FORD C-MAX (DM2). Tip from AUTODOC:
Make sure the disc surface is clean before installing the pads.
Step 16

Install new brake pads.

Replacement: brake pads – FORD C-MAX (DM2). Professionals recommend:
Make sure the pads are installed with linings facing the disc.
Step 17

Install the brake caliper and fix it. Use HEX No.H7. Use a torque wrench. Tighten it to 28 Nm torque.
Step 18

Install the dust boot caps of the brake caliper guide pins.
Step 19

Install the brake caliper retaining spring.

Replacement: brake pads – FORD C-MAX (DM2). Tip from AUTODOC experts:
Without starting the engine, press the brake pedal several times until you feel significant resistance.
Step 20

Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 21

Install the wheel.

AUTODOC recommends:
Important! Hold the wheel while screwing in the fastening bolts. FORD C-MAX (DM2)
Step 22

Screw in the wheel bolts. Use wheel impact socket #19.
Step 23

Lower the car and working in a cross order, tighten the wheel bolts. Use a torque wrench. Tighten it to 110 nm torque.
Step 24

Remove the jacks and chocks.

AUTODOC recommends:
Important! Replacement: brake pads – FORD C-MAX (DM2). Check the brake fluid level in the reservoir and top up if necessary.
Step 25

Tighten the brake fluid reservoir cap. Close the hood.

Replacement: brake pads – FORD C-MAX (DM2). AUTODOC recommends:
Slow down smoothly for first 150-200 km after the brake pads replacement. Avoid unneccessary and sharp braking to a stop.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Need New Tyres?

Find out which tyre and wheel sizes are compatible with the FORD C-Max (DM2) model

Ford C-Max DM2 tyre size

How to change front brake discs on FORD C-Max (DM2) – replacement guide

Free download PDF
2.11 MB
How to change rear brake discs on FORD C-MAX (DM2) – replacement guide

Free download PDF
2.12 MB
How to change front brake caliper on FORD C-MAX (DM2) – replacement guide

Free download PDF
2.11 MB
How to change rear brake pads on FORD C-MAX (DM2) – replacement guide

Free download PDF
1.72 MB
How to change rear wheel bearing on FORD C-MAX (DM2) – replacement guide

Free download PDF
2.25 MB
How to change front wheel bearing on FORD C-MAX (DM2) – replacement guide

Free download PDF
3.82 MB

How to change front brake pads on FORD Grand C-Max (DXA/CB7, DXA/CEU) – replacement guide

Free download PDF
2.36 MB
How to change rear brake pads on FORD Grand C-Max (DXA/CB7, DXA/CEU) – replacement guide

Free download PDF
1.72 MB
How to change front brake pads on FORD C-Max II (DXA/CB7, DXA/CEU) – replacement guide

Free download PDF
2.38 MB
How to change rear brake pads on FORD C-Max II (DXA/CB7, DXA/CEU) – replacement guide

Free download PDF
1.72 MB
How to change rear brake pads on FORD C-MAX (DM2) – replacement guide

Free download PDF
1.72 MB
How to change brake pads on a car – replacement tutorial

Universal

Free download PDF
2.84 MB

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

Stop Rust Before It Starts: Top 5 Tips for Car Body Protection | AUTODOC Insights

7K views

Published on: 27/07/2023
How to Get the Best Deals on Car Parts | Save Money with AUTODOC

2K views

Published on: 03/02/2022
Discover the 4 Key Reasons Your CHECK ENGINE Light Could Be On | AUTODOC Tips

7K views

Published on: 30/03/2022
The Fast and Easy Way to Fix a Broken Wheel Stud | AUTODOC tips

9K views

Published on: 08/12/2020