
Disclaimer
How to change front ABS sensor on BMW E82 – replacement guide
downloads:
11
Views:
418
Important!
This replacement procedure can be used for:
BMW 1 Coupe (E82) 135 i, BMW 1 Coupe (E82) 120d, BMW 1 Coupe (E82) 123d, BMW 1 Coupe (E82) 125i, BMW 1 Coupe (E82) 120d, BMW 1 Coupe (E82) 120d, BMW 1 Coupe (E82) 135 i … View more
The steps may slightly vary depending on the car design.
BMW 1 Coupe (E82) 135 i, BMW 1 Coupe (E82) 120d, BMW 1 Coupe (E82) 123d, BMW 1 Coupe (E82) 125i, BMW 1 Coupe (E82) 120d, BMW 1 Coupe (E82) 120d, BMW 1 Coupe (E82) 135 i … View more
The steps may slightly vary depending on the car design.
How to change front ABS sensor on BMW 1 Series E82 [TUTORIAL AUTODOC]

All the parts you need to replace – ABS Sensor for 1 Coupe (E82) and other BMW models
ABS sensor
Alternative products

Wire brush
WD-40 spray
All-purpose cleaning spray
Brake cleaner
Multipurpose grease
Copper grease
HEX bit no.H5.
Wheel impact socket #17
Ratchet wrench
Torque wrench
Flat Screwdriver
Round-nose pliers
Wheel chock
Replacement: abs sensor – BMW E82. Professionals recommend:
- The replacement procedure is identical for both ABS sensors on the same axle.
- All work should be done with the engine stopped.
Replacement: abs sensor – BMW E82. Take the following steps:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the front of the car and secure on supports.
- Step 4Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. BMW E82
- Step 5Remove the wheel.
- Step 6Disconnect the ABS sensor wiring.
- Step 7Detach the ABS sensor connector.
- Step 8Disconnect the ABS sensor wiring.
- Step 9Clean the ABS sensor fastener. Use a wire brush. Use WD-40 spray.
- Step 10Unscrew the ABS sensor fastening from the steering knuckle. Use HEX No.H5. Use a ratchet wrench.
- Step 11Remove the ABS sensor from the steering knuckle. Use round-nose pliers.
- Step 12Clean the ABS sensor mounting seat. Use a wire brush. Use all-purpose cleaning spray.
- Step 13Treat the ABS sensor fastener. Use a multipurpose grease. Use a flat screwdriver.
- Step 14Install the ABS sensor on the steering knuckle and secure it.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the BMW 1 Coupe (E82) model
Popular maintenance tutorials for BMW E82
Complete guides for changing the Wheel speed sensor on different BMW 1 SERIES models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your BMW 1 Coupe (E82)
View more
- 3 essential tips for choosing summer tyres | Get ready for warmer weather
- Initial Car Inspection: What to Check Before You Buy
- Petrol or diesel: The engine showdown! | AUTODOC
- How to unlock your car without a key | AUTODOC tips
Most commonly replaced car parts on BMW 1 SERIES
Time to replace parts? Get even better deals in our Shop app.

SCAN ME