How to change front brake discs on OPEL Meriva B (S10) – replacement guide
OPEL Meriva B (S10) 1.4 LPG (75), OPEL Meriva B (S10) 1.4 (75), OPEL Meriva B (S10) 1.4 (75), OPEL Meriva B (S10) 1.7 CDTI (75), OPEL Meriva B (S10) 1.3 CDTI (75), OPEL Meriva B (S10) 1.3 CDTI (75), OPEL Meriva B (S10) 1.7 CDTI (75) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle

- Replace the brake disks on the car OPEL MERIVA B in complete set for each axis. Regardless of the state of components. This will ensure even braking.
- The replacement procedure is identical for both brake disks on the same axle.
- When changing the brake discs, always replace the brake pads.
- All work should be done with the engine stopped.
- Step 1
Open the bonnet. Unscrew the brake fluid reservoir cap.
Step 2
Secure the wheels with chocks.
- Step 3

Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 4
Raise the front of the car and secure on supports.
Step 5
Unscrew the wheel bolts.
Replacement: brake discs – OPEL MERIVA B. AUTODOC recommends:To avoid injury, hold up the wheel when unscrewing the bolts.
- Step 6

Remove the wheel.
- Step 7

Remove the dust boot caps of the brake caliper guide pins. Use a crowbar.
- Step 8

Unscrew the brake caliper fastening. Use HEX No.H7. Use a ratchet wrench.
- Step 9

Spread the brake pads. Use a crowbar.
- Step 10

Pull aside the brake caliper retaining spring. Use a crowbar.
- Step 11

Remove the brake caliper.
Replacement: brake discs – OPEL MERIVA B. Professionals recommend:Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
- Step 12

Remove the brake pads.
- Step 13

Clean the brake caliper bracket fasteners. Use a wire brush. Use WD-40 spray.
- Step 14

Unscrew the caliper bracket fastening. Use a drive socket #18. Use a tap wrench.
- Step 15

Remove the caliper bracket.
- Step 16

Clean the brake disc fasteners. Use a wire brush. Use WD-40 spray.
- Step 17

Unscrew the brake disc fastening. Use HEX No.H5. Use a ratchet wrench.
- Step 18

Remove the brake disc.
Replacement: brake discs – OPEL MERIVA B. Tip from AUTODOC:If necessary, use a rubber mallet.
- Step 19

Clean the hub. Use a wire brush. Treat the contacting surface. Use copper grease.
- Step 20

Install the brake disc.
- Step 21

Tighten the brake disc fastening. Use HEX No.H5. Use a torque wrench. Tighten it to 7 Nm torque.
- Step 22

Clean the brake caliper bracket from dirt and dust. Use a wire brush. Use a brake cleaner.
AUTODOC recommends:Replacement: brake discs – OPEL MERIVA B. After applying the spray, wait a few minutes.
Find out which tyre and wheel sizes are compatible with the OPEL Meriva B (S10) model
Popular maintenance tutorials for Opel Meriva B
Complete guides for changing the Brake rotors on different OPEL MERIVA models
Track expenses, manage logs, schedule replacements, and more.
Top 5 Mistakes to Avoid for Safe Engine Bay Repairs | AUTODOC Tips
How to fix your car with AUTODOC CLUB
Initial Car Inspection: What to Check Before You Buy
How to prevent car windows from fogging up | AUTODOC tips
Most commonly replaced car parts on OPEL MERIVA
































