Disclaimer
How to change front ball joint on Skoda Octavia 1U – replacement guide
downloads:
10
Views:
202
Important!
This replacement procedure can be used for:
SKODA OCTAVIA (1U2) 1.6, SKODA OCTAVIA (1U2) 1.8, SKODA OCTAVIA (1U2) 1.9 TDI, SKODA OCTAVIA (1U2) 1.6, SKODA OCTAVIA (1U2) 1.9 SDI, SKODA OCTAVIA (1U2) 1.9 TDI, SKODA OCTAVIA (1U2) 1.8 T, SKODA OCTAVIA (1U2) 2.0, SKODA OCTAVIA (1U2) 1.4, SKODA OCTAVIA (1U2) 1.4 16V, SKODA OCTAVIA (1U2) RS 1.8 T, SKODA OCTAVIA (1U2) 1.8 T 4x4, SKODA OCTAVIA (1U2) 1.9 TDI … View more
The steps may slightly vary depending on the car design.
SKODA OCTAVIA (1U2) 1.6, SKODA OCTAVIA (1U2) 1.8, SKODA OCTAVIA (1U2) 1.9 TDI, SKODA OCTAVIA (1U2) 1.6, SKODA OCTAVIA (1U2) 1.9 SDI, SKODA OCTAVIA (1U2) 1.9 TDI, SKODA OCTAVIA (1U2) 1.8 T, SKODA OCTAVIA (1U2) 2.0, SKODA OCTAVIA (1U2) 1.4, SKODA OCTAVIA (1U2) 1.4 16V, SKODA OCTAVIA (1U2) RS 1.8 T, SKODA OCTAVIA (1U2) 1.8 T 4x4, SKODA OCTAVIA (1U2) 1.9 TDI … View more
The steps may slightly vary depending on the car design.
How to change a front Ball joint SKODA OCTAVIA 1U TUTORIAL | AUTODOC

All the parts you need to replace – Suspension Ball Joint for OCTAVIA (1U2) and other SKODA models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
High-temperature ceramic grease
Torque wrench
Drive socket # 13
Drive socket # 16
Drive socket # 30
Combination spanner #18
Wheel impact socket #17
Ratchet wrench
Crow bar
Ball joint puller
Rubber mallet
Pin punch
Wheel chock
Replacement: ball joint – Skoda Octavia 1U. Tip:
- The replacement procedure is identical for the left and right ball joints.
- All work should be done with the engine stopped.
Replacement: ball joint – Skoda Octavia 1U. Take the following steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts.Use wheel impact socket #17. - Step 3
Raise the front of the car and secure on supports. - Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. Skoda Octavia 1U - Step 5
Remove the wheel. - Step 6
Clean the ball joint fasteners.Use a wire brush.Use WD-40 spray. - Step 7
Unscrew the ball joint fastening to the steering knuckle.Use a combination spanner #18. - Step 8
Loosen the fastener of the driveshaft.Use a drive socket #30.Use a ratchet wrench. - Step 9
Remove the drive shaft.Use a pin punch.Use a rubber mallet. - Step 10Clean the stabiliser link fasteners.Use a wire brush.Use WD-40 spray.Step 11
Unscrew the fastener connecting the stabilizer link to the control arm.Use a drive socket #16.Use a ratchet wrench. - Step 12Remove the fastening bolt.Step 13
Disconnect the ball joint from the steering knuckle.Use a ball joint puller. - Step 14
Unscrew the fastener connecting the ball joint to the suspension control arm.Use a drive socket #13.Use a ratchet wrench. - Step 15Remove the fastening bolts.Step 16
Remove the ball joint. - Step 17
Clean the ball joint mounting seat.Use a wire brush.Use WD-40 spray. - Step 18
Install a new ball joint.AUTODOC recommends:Do not damage the ball joint cover.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the SKODA Octavia I Hatchback (1U2) model
Popular maintenance tutorials for Skoda Octavia 1u
Complete guides for changing the Suspension ball joint on different SKODA OCTAVIA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your SKODA OCTAVIA (1U2)
View more
TOP 6 WD-40 lifehacks | AUTODOC tips
Three ways to change oil without a lift
#TPMS Explained: Why Your Light is On and How to Respond Safely
Why Is the Windscreen Washer Not Spraying? Solution
Most commonly replaced car parts on SKODA OCTAVIA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





























