How to carry out replacement: Anti Roll Bar Links 2.0 TDI VW CC 358
Disclaimer
Change VW CC 358 2.0 TSI Anti Roll Bar Links yourself – manuals and video tutorials

How to change front anti roll bar links on VW CC (358) – replacement guide

downloads: 4
Views: 32
Download your free tutorial and fix VW CC (358) 1.4 TSI problems yourself Download for free 1.15 MB Anti Roll Bar Links for VW CC 358 Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
VW CC (358) 2.0 TDI, VW CC (358) 3.6 FSI 4motion, VW CC (358) 2.0 TSI, VW CC (358) 2.0 TDI, VW CC (358) 1.8 TSI, VW CC (358) 2.0 TFSI, VW CC (358) 1.8 TSI, VW CC (358) 2.0 TDI, VW CC (358) 2.0 TDI, VW CC (358) 1.4 TSI, VW CC (358) 2.0 TDI 4motion, VW CC (358) 2.0 TDI 4motion, VW CC (358) 2.0 TDI 4motion, VW CC (358) 1.4 TSI MultiFuel, VW CC (358) 1.4 TSI, VW CC (358) 2.0 TDI, VW CC (358) 2.0 TDI … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for CC (358) and other VW models
Alternative products
How to change Anti-roll bar link on VW CC 358 2.0 TDI – step-by-step instructions for straightforward car repair Anti-roll bar link
Tools
Replacement: anti roll bar links – VW CC (358). List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Ceramic grease
Copper grease
Torque wrench
Combination spanner #18
Combination spanner #19
Drive socket # 18
Drive socket # 19
XZN socket bit #6
HEX bit No.H5
Wheel impact socket #17
Ratchet wrench
Wheel chock
Buy tools
AUTODOC recommends:
  • Replace the stabiliser links on VW CC (358) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • Please note: all work on the car – VW CC (358) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Anti Roll Bar Links on VW CC 358 2011 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the car.
    Replacement: anti roll bar links – VW CC (358). Professionals recommend:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
    Step 4
    How to replace VW CC (358) 2.0 TDI 2012 Anti Roll Bar Links - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VW CC (358)
  3. Step 5
    VW CC 358 2.0 TDI 4motion 2013 Anti Roll Bar Links replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Anti Roll Bar Links on VW CC (358) 2.0 TSI 2014 by yourself
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove VW CC 3.6 FSI 4motion 2015 Anti Roll Bar Links - online easy-to-follow instructions
    Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #18. Use XZN #6. Use a ratchet wrench.
  6. Step 8
    How to replace Anti Roll Bar Links on VW CC (358) 2016: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #18. Use XZN #6. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Anti Roll Bar Links replacement on VW CC 358 2.0 TDI 4motion 2011 - download illustrated guide
    Remove the stabiliser link.
    Replacement: anti roll bar links – VW CC (358). Tip from AUTODOC experts:
    Examine stabiliser bushes. Replace them if needed.
  8. Step 10
    Need to know how to renew Anti Roll Bar Links on VW CC 2012? This free workshop manual will help you to do it yourself
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
  9. Step 11
    Changing of Anti Roll Bar Links on VW CC 358 2013 won't be an issue if you follow this illustrated step-by-step guide
    Install a new stabiliser link and tighten the fasteners. Use a combination spanner #19. Use HEX No.H5. Use a ratchet wrench.
  10. Step 12
    VW CC 2.0 TSI Anti Roll Bar Links replacement: online guides and video tutorials
    Tighten the fastener connecting the stabilizer link to the shock strut. Use a drive socket #19. Use a torque wrench. Tighten it to 65 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the VW CC (358) model

VW CC 358 tyre size

Popular maintenance tutorials for VW CC 358

More manuals for VW CC 358

Complete guides for changing the Drop links on different VW CC models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY VW CC (358) Anti Roll Bar Links replacement - online guide
Tips & tricks for your VW CC (358)
View more
  • How to change Drop links on VW CC (358) 1.4 TSI - replacement tricks
    Top 5 possible reasons your car is shaking or vibrating
    6K views
    Published on: 14/02/2025
  • Changing Stabilizer link VW CC 358 2.0 TDI - Replacement Tips
    Initial Car Inspection: What to Check Before You Buy
    5K views
    Published on: 24/10/2020
  • Maintenance Hacks - VW CC (358) 2.0 TDI 4motion Sway bar link replacement guide
    How to replace a timing chain yourself
    19K views
    Published on: 12/12/2024
  • Replace Drop link on VW CC 358 - free video tips
    What to do if the ABS light comes on: DIY Diagnostics Tips
    8K views
    Published on: 11/03/2021

Most commonly replaced car parts on VW CC

Professional manuals for the most common VW models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
VW CC (358) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME