Important!

This replacement procedure can be used for:
PEUGEOT 5008 (0U_, 0E_) 1.6 HDi, PEUGEOT 5008 (0U_, 0E_) 2.0 HDi 136 / BlueHDi 136, PEUGEOT 5008 (0U_, 0E_) 1.6 16V, PEUGEOT 5008 (0U_, 0E_) 1.6 16V, PEUGEOT 5008 (0U_, 0E_) 1.6 HDi, PEUGEOT 5008 (0U_, 0E_) 2.0 HDi 150 / BlueHDi 150, PEUGEOT 5008 (0U_, 0E_) 2.0 HDi, PEUGEOT 5008 (0U_, 0E_) 1.6 HDi, PEUGEOT 5008 (0U_, 0E_) 1.6 THP 150, PEUGEOT 5008 (0U_, 0E_) 1.6 THP 163, PEUGEOT 5008 (0U_, 0E_) 1.6 BlueHDi 120, PEUGEOT 5008 (0U_, 0E_) 1.2, PEUGEOT 5008 (0U_, 0E_) 1.6 THP 165 … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for 5008 (0U_, 0E_) and other PEUGEOT models

Anti-roll bar link

        Anti-roll bar link for 5008 I (0U_, 0E_) Diesel (112 hp)
      
        Anti-roll bar link for 5008 I (0U_, 0E_) Diesel (136 hp)
      
        Anti-roll bar link for 5008 I (0U_, 0E_) Petrol (120 hp)
      
        Anti-roll bar link for 5008 I (0U_, 0E_) Petrol (156 hp)
      
        Anti-roll bar link for 5008 I (0U_, 0E_) Diesel (110 hp)
      
        Anti-roll bar link for 5008 I (0U_, 0E_) Diesel (150 hp)
      
        Anti-roll bar link for 5008 I (0U_, 0E_) Diesel (163 hp)
      
        Anti-roll bar link for 5008 I (0U_, 0E_) Diesel (114 hp)
      
        Anti-roll bar link for 5008 I (0U_, 0E_) Petrol (150 hp)

Replacement: anti roll bar links – PEUGEOT 5008. Tools you need:

                        Wire brush
                      
                        WD-40 spray
                      
                        Brake cleaner 
                      
                        Copper grease 
                      
                        Combination spanner #16
                      
                        Drive socket # 15 
                      
                        Drive socket # 17 
                      
                        Wheel impact socket #17
                      
                        Ratchet wrench
                      
                        Wheel chock

Buy tools

Replacement: anti roll bar links – PEUGEOT 5008. AUTODOC experts recommend:

Replace the stabiliser links on PEUGEOT 5008 in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
All work should be done with the engine stopped.

Replacement: anti roll bar links – PEUGEOT 5008. Recommended sequence of steps:

Step 1

Secure the wheels with chocks.

Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #17.
Step 3

Raise the front of the car and secure on supports.

Step 4

Unscrew the wheel bolts.

Replacement: anti roll bar links – PEUGEOT 5008. AUTODOC recommends:
To avoid injury, hold up the wheel when unscrewing the bolts.
Step 5

Remove the wheel.
Step 6

Remove the ABS wiring harness bracket.
Step 7

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 8

Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #15. Use a ratchet wrench.
Step 9

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 10

Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use a drive socket #15. Use a ratchet wrench.
Step 11

Remove the stabilizer rod.

Replacement: anti roll bar links – PEUGEOT 5008. Tip from AUTODOC experts:
Examine stabiliser bushes. Replace them if needed.
Step 12

Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
Step 13

Install a new rod, tighten the fasteners.
Step 14

Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #17. Use a torque wrench. Tighten it to 36 Nm torque.
Step 15

Tighten the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a torque wrench. Tighten it to 36 Nm torque.
Step 16

Treat all joints of the stabiliser link. Use copper grease.
Step 17

Install the ABS wiring harness bracket.
Step 18

Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 19

Clean the brake disk surface. Use a brake cleaner.

AUTODOC recommends:
Replacement: anti roll bar links – PEUGEOT 5008. After applying the spray, wait a few minutes.
Step 20

Install the wheel.

Replacement: anti roll bar links – PEUGEOT 5008. Tip from AUTODOC:
To avoid injury, hold up the wheel when screwing in the fastening bolts.
Step 21

Screw in the wheel bolts. Use wheel impact socket #17.
Step 22

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #17. Use a torque wrench. Tighten it to 100 nm torque.
Step 23

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the PEUGEOT 5008 I (0U_, 0E_) model.

Peugeot 5008 mk1 tyre size

How to change front wheel bearing on PEUGEOT 5008 I (0U_, 0E_) – replacement guide

Free download PDF
5.98 MB
How to change front ball joint on PEUGEOT 5008 I (0U_, 0E_) – replacement guide

Free download PDF
2.46 MB
How to change front brake discs on PEUGEOT 5008 I (0U_, 0E_) – replacement guide

Free download PDF
2.84 MB
How to change serpentine belt on PEUGEOT 5008 I (0U_, 0E_) – replacement guide

Free download PDF
1.41 MB
How to change spark plugs on PEUGEOT 5008 I (0U_, 0E_) – replacement guide

Free download PDF
1.17 MB
How to change engine oil and filter on PEUGEOT 5008 I (0U_, 0E_) – replacement guide

Free download PDF
3.11 MB

How to change front anti roll bar links on PEUGEOT 5008 II – replacement guide

Free download PDF
1.33 MB
How to change anti roll bar links on a car – replacement tutorial

Universal

Free download PDF
972.8 KB
How to change front anti roll bar links on Peugeot 206 CC 2D – replacement guide

Free download PDF
1.32 MB
How to change front anti roll bar links on Peugeot 307 SW – replacement guide

Free download PDF
1.33 MB
How to change front anti roll bar links on Peugeot 407 saloon – replacement guide

Free download PDF
1.54 MB
How to change rear anti roll bar links on Peugeot 407 saloon – replacement guide

Free download PDF
1.35 MB

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Scan

To download the app:

- scan the QR code
- download from App Store
- download from Google Play

How to detect vacuum leaks using a smoke machine | AUTODOC

19K views

Published on: 23/07/2020
TOP 5 mistakes during DIY oil change | AUTODOC tips

34K views

Published on: 17/06/2021
How do EGR valves work? | AUTODOC

18K views

Published on: 18/07/2020
What to do if the TPMS light is on | AUTODOC tips

6K views

Published on: 28/09/2023