Disclaimer
How to change front anti roll bar links on Peugeot 307 SW – replacement guide
downloads:
15
Views:
263
Important!
This replacement procedure can be used for:
PEUGEOT 307 SW (3H) 1.6 16V, PEUGEOT 307 SW (3H) 2.0 16V, PEUGEOT 307 SW (3H) 2.0 HDI 90, PEUGEOT 307 SW (3H) 2.0 HDI 110, PEUGEOT 307 SW (3H) 1.4 16V, PEUGEOT 307 SW (3H) 1.6 HDI 110, PEUGEOT 307 SW (3H) 2.0 16V, PEUGEOT 307 SW (3H) 1.4, PEUGEOT 307 SW (3H) 1.6 HDI 90 … View more
The steps may slightly vary depending on the car design.
PEUGEOT 307 SW (3H) 1.6 16V, PEUGEOT 307 SW (3H) 2.0 16V, PEUGEOT 307 SW (3H) 2.0 HDI 90, PEUGEOT 307 SW (3H) 2.0 HDI 110, PEUGEOT 307 SW (3H) 1.4 16V, PEUGEOT 307 SW (3H) 1.6 HDI 110, PEUGEOT 307 SW (3H) 2.0 16V, PEUGEOT 307 SW (3H) 1.4, PEUGEOT 307 SW (3H) 1.6 HDI 90 … View more
The steps may slightly vary depending on the car design.
How to change front anti roll bar link / drop link on PEUGEOT 307 SW [TUTORIAL AUTODOC]
All the parts you need to replace – Anti Roll Bar Links for 307 SW (3H) and other PEUGEOT models
Anti-roll bar link
Alternative products
Anti-roll bar link
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #16
Drive socket # 15
Drive socket # 17
Wheel impact socket #17
Ratchet wrench
Wheel chock
Replacement: anti roll bar links – Peugeot 307 SW. AUTODOC experts recommend:
- Replace the stabiliser links on Peugeot 307 SW in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – Peugeot 307 SW. Recommended sequence of steps:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3
Raise the front of the car and secure on supports. - Step 4
Unscrew the wheel bolts.Replacement: anti roll bar links – Peugeot 307 SW. AUTODOC recommends:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Remove the ABS wiring harness bracket. - Step 7
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 8
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #15. Use a ratchet wrench. - Step 9
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 10
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use a drive socket #15. Use a ratchet wrench. - Step 11
Remove the stabilizer rod.Replacement: anti roll bar links – Peugeot 307 SW. Tip from AUTODOC experts:Examine stabiliser bushes. Replace them if needed. - Step 12
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 13
Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the PEUGEOT 307 SW (3H) model
Popular maintenance tutorials for Peugeot 307 SW
Free download PDF
3.66 MB
Free download PDF2.38 MB
Free download PDF2.85 MB
Free download PDF2.36 MB
Free download PDF1.71 MB
Free download PDF1.68 MB
Complete guides for changing the Drop links on different PEUGEOT 307 models
Free download PDF1.33 MB
Free download PDF1.33 MB
Free download PDF1.33 MB
Free download PDF972.8 KB
Free download PDF1.32 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your PEUGEOT 307 SW (3H)
View more
3 essential tips for choosing summer tyres | Get ready for warmer weather
Petrol or diesel: The engine showdown! | AUTODOC
TOP 5 mistakes during DIY oil change | AUTODOC tips
Top Automatic Transmission Blunders You Must Dodge | AUTODOC Insights
Most commonly replaced car parts on PEUGEOT 307
Time to replace parts? Get even better deals in our Shop app.
SCAN ME