
Disclaimer
How to change front anti roll bar links on PEUGEOT 307 CC (3B) – replacement guide
downloads:
3
Views:
45
Important!
This replacement procedure can be used for:
PEUGEOT 307 CC (3B) 2.0 HDi, PEUGEOT 307 CC (3B) 2.0 16V, PEUGEOT 307 CC (3B) 1.6 16V, PEUGEOT 307 CC (3B) 2.0 16V, PEUGEOT 307 CC (3B) 2.0 16V … View more
The steps may slightly vary depending on the car design.
PEUGEOT 307 CC (3B) 2.0 HDi, PEUGEOT 307 CC (3B) 2.0 16V, PEUGEOT 307 CC (3B) 1.6 16V, PEUGEOT 307 CC (3B) 2.0 16V, PEUGEOT 307 CC (3B) 2.0 16V … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for 307 CC (3B) and other PEUGEOT models
Anti-roll bar link
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #16
Drive socket # 15
Drive socket # 17
Wheel impact socket #17
Ratchet wrench
Wheel chock
Replacement: anti roll bar links – PEUGEOT 307 CC (3B). AUTODOC experts recommend:
- Replace the stabiliser links on PEUGEOT 307 CC (3B) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – PEUGEOT 307 CC (3B). Recommended sequence of steps:
- Step 1Secure the wheels with chocks.Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the front of the car and secure on supports.Step 4Unscrew the wheel bolts.Replacement: anti roll bar links – PEUGEOT 307 CC (3B). AUTODOC recommends:To avoid injury, hold up the wheel when unscrewing the bolts.
- Step 5Remove the wheel.
- Step 6Remove the ABS wiring harness bracket.
- Step 7Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
- Step 8Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #15. Use a ratchet wrench.
- Step 9Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
- Step 10Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use a drive socket #15. Use a ratchet wrench.
- Step 11Remove the stabilizer rod.Replacement: anti roll bar links – PEUGEOT 307 CC (3B). Tip from AUTODOC experts:Examine stabiliser bushes. Replace them if needed.
- Step 12Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
- Step 13Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the PEUGEOT 307 CC (3B) model
Popular maintenance tutorials for Peugeot 307 cc 3b
Complete guides for changing the Drop links on different PEUGEOT 307 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your PEUGEOT 307 CC (3B)
View more
- Kolbenschmidt plastic gauge overview
- Top 5 mistakes when replacing spark plugs | AUTODOC tips
- Top 5 reasons why the suspension knocks | AUTODOC tips
- What to do if the ABS light comes on: DIY Diagnostics Tips
Most commonly replaced car parts on PEUGEOT 307
Time to replace parts? Get even better deals in our Shop app.

SCAN ME