Disclaimer
How to change front anti roll bar links on PEUGEOT 207 SW – replacement guide
downloads:
8
Views:
67
Important!
This replacement procedure can be used for:
PEUGEOT 207 SW (WK_) 1.6, PEUGEOT 207 SW (WK_) 1.4 Flex, PEUGEOT 207 SW (WK_) 1.6 Flex, PEUGEOT 207 SW (WK_) 1.4, PEUGEOT 207 SW (WK_) 1.4 16V, PEUGEOT 207 SW (WK_) 1.6 16V, PEUGEOT 207 SW (WK_) 1.6 HDi, PEUGEOT 207 SW (WK_) 1.6 HDi, PEUGEOT 207 SW (WK_) 1.6 16V RC, PEUGEOT 207 SW (WK_) 1.6 HDi, PEUGEOT 207 SW (WK_) 1.6 HDi, PEUGEOT 207 SW (WK_) 1.4 16V, PEUGEOT 207 SW (WK_) 2.0 HDi, PEUGEOT 207 SW (WK_) 1.6 16V Turbo, PEUGEOT 207 SW (WK_) 1.4 LPG … View more
The steps may slightly vary depending on the car design.
PEUGEOT 207 SW (WK_) 1.6, PEUGEOT 207 SW (WK_) 1.4 Flex, PEUGEOT 207 SW (WK_) 1.6 Flex, PEUGEOT 207 SW (WK_) 1.4, PEUGEOT 207 SW (WK_) 1.4 16V, PEUGEOT 207 SW (WK_) 1.6 16V, PEUGEOT 207 SW (WK_) 1.6 HDi, PEUGEOT 207 SW (WK_) 1.6 HDi, PEUGEOT 207 SW (WK_) 1.6 16V RC, PEUGEOT 207 SW (WK_) 1.6 HDi, PEUGEOT 207 SW (WK_) 1.6 HDi, PEUGEOT 207 SW (WK_) 1.4 16V, PEUGEOT 207 SW (WK_) 2.0 HDi, PEUGEOT 207 SW (WK_) 1.6 16V Turbo, PEUGEOT 207 SW (WK_) 1.4 LPG … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for 207 SW (WK_) and other PEUGEOT models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #16
Torx bit T30
Drive socket # 17
Wheel impact socket #17
Ratchet wrench
Wheel chock
Replacement: anti roll bar links – PEUGEOT 207 SW (WK_). AUTODOC recommends:
- Replace the stabiliser links on PEUGEOT 207 SW (WK_) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – PEUGEOT 207 SW (WK_). Recommended sequence of steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: anti roll bar links – PEUGEOT 207 SW (WK_). Tip:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use Torx T30. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #16. Use Torx T30. Use a ratchet wrench. - Step 9
Remove the stabilizer rod.AUTODOC recommends:Examine stabiliser bushes. Replace them if needed. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 11
Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the PEUGEOT 207 SW model
Popular maintenance tutorials for Peugeot 207 SW
Complete guides for changing the Drop links on different PEUGEOT 207 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your PEUGEOT 207 SW (WK_)
View more
What causes engine misfire? | AUTODOC
Easy Steps to Paint Brake Calipers Without Special Skills or High Costs
TOP 5 mistakes during DIY oil change | AUTODOC tips
Why Is the Windscreen Washer Not Spraying? Solution
Most commonly replaced car parts on PEUGEOT 207
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

























