Disclaimer
How to change front anti roll bar links on NISSAN TIIDA Hatchback – replacement guide
downloads:
0
Views:
26
Important!
This replacement procedure can be used for:
NISSAN TIIDA Hatchback 1.6, NISSAN TIIDA Hatchback 1.8 … View more
The steps may slightly vary depending on the car design.
NISSAN TIIDA Hatchback 1.6, NISSAN TIIDA Hatchback 1.8 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for TIIDA Hatchback and other NISSAN models
Alternative products

Wire brush
WD-40 spray
All-purpose cleaning spray
Ceramic grease
Torque wrench
Combination spanner #17
Drive socket # 17
HEX bit no.H5.
Wheel impact socket #17
Ratchet wrench
Tap wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on NISSAN TIIDA Hatchback in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – NISSAN TIIDA Hatchback. Take the following steps:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel bolts. Use wheel impact socket #17. Use a tap wrench. - Step 3Raise the car.Replacement: anti roll bar links – NISSAN TIIDA Hatchback. AUTODOC recommends:If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.Step 4
Unscrew the wheel bolts.AUTODOC recommends:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #17. Use HEX No.H5. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17. Use HEX No.H5. Use a ratchet wrench. - Step 9
Remove the stabiliser link. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use all-purpose cleaning spray. - Step 11
Install a new stabiliser link and tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the NISSAN Tiida Hatchback (C11) model
Popular maintenance tutorials for Nissan Tiida C11
Complete guides for changing the Drop links on different NISSAN TIIDA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your NISSAN TIIDA Hatchback
View more
Three ways to change oil without a lift
2 ways to clean the EGR valve – which one is better?
Why Is the Windscreen Washer Not Spraying? Solution
Top 5 Car Interior Cleaning Mistakes You Should Avoid | AUTODOC Tips
Most commonly replaced car parts on NISSAN TIIDA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





























