
Disclaimer
How to change front anti roll bar links on FORD FIESTA Box (FVD) – replacement guide
downloads:
2
Views:
12
Important!
This replacement procedure can be used for:
FORD FIESTA Box (FVD) 1.8 D (FVJ) … View more
The steps may slightly vary depending on the car design.
FORD FIESTA Box (FVD) 1.8 D (FVJ) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for FIESTA Box (FVD) and other FORD models
Anti-roll bar link
Rod / Strut, wheel suspension
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #15
Combination spanner #17
Drive socket # 15
Drive socket # 17
Wheel impact socket #19
Ratchet wrench
Wheel chock
Replacement: anti roll bar links – FORD FIESTA Box (FVD). AUTODOC recommends:
- Replace the stabiliser links on FORD FIESTA Box (FVD) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- Please note: all work on the car – FORD FIESTA Box (FVD) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.Step 2Loosen the wheel mounting bolts. Use wheel impact socket #19.
- Step 3Raise the front of the car and secure on supports.Step 4Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. FORD FIESTA Box (FVD)
- Step 5Remove the wheel.
- Step 6Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
- Step 7Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17. Use a drive socket #17. Use a ratchet wrench.
- Step 8Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #17. Use a drive socket #17. Use a ratchet wrench.
- Step 9Remove the stabilizer rod.
- Step 10Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
- Step 11Install a new rod, tighten the fasteners. Use a combination spanner #15. Use a drive socket #15. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FORD Fiesta Mk2 Van (FVD) model
Popular maintenance tutorials for Ford Fiesta Mk2 Van
Complete guides for changing the Drop links on different FORD FIESTA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FORD FIESTA Box (FVD)
View more
- When, why, and how to change engine oil | AUTODOC tips
- DIY car soundproofing | AUTODOC tips
- 5 tools that make car repair incredibly simple | AUTODOC tips
- Top 5 Car Interior Cleaning Mistakes You Should Avoid | AUTODOC Tips
Most commonly replaced car parts on FORD FIESTA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME