Important!

This replacement procedure can be used for:
FORD B-MAX (JK) 1.0 EcoBoost, FORD B-MAX (JK) 1.0 EcoBoost, FORD B-MAX (JK) 1.6 Ti, FORD B-MAX (JK) 1.6 TDCi, FORD B-MAX (JK) 1.4, FORD B-MAX (JK) 1.5 TDCi, FORD B-MAX (JK) 1.0 EcoBoost, FORD B-MAX (JK) 1.4 LPG, FORD B-MAX (JK) 1.5 TDCi, FORD B-MAX (JK) 1.0 EcoBoost … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Alternative products

Anti-roll bar link

Replacement: anti roll bar links – FORD B-MAX (JK). List of the tools you'll need:

                      Wire brush
                    
                      WD-40 spray
                    
                      Brake cleaner
                    
                      Copper grease
                    
                      Combination spanner #15
                    
                      HEX bit no.H5.
                    
                      Drive socket # 15
                    
                      Wheel impact socket #19
                    
                      Ratchet wrench
                    
                      Torque wrench
                    
                      Wheel chock

Buy tools

Replacement: anti roll bar links – FORD B-MAX (JK). AUTODOC experts recommend:

Replace the stabiliser links on FORD B-MAX (JK) in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
Warning! Shut down the engine before starting any work – FORD B-MAX (JK).

Carry out replacement in the following order:

Step 1

Secure the wheels with chocks.
Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #19.
Step 3

Raise the front of the car and secure on supports.

Step 4

Unscrew the wheel bolts.

AUTODOC recommends:
Important! Hold the wheel while unscrewing the fastening bolts. FORD B-MAX (JK)
Step 5

Remove the wheel.
Step 6

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 7

Unscrew the fasteners connecting the stabiliser link to the stabiliser bar. Use a combination spanner #15. Use HEX No.H5. Use a ratchet wrench.
Step 8

Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #15. Use a ratchet wrench.
Step 9

Remove the stabilizer rod.

Replacement: anti roll bar links – FORD B-MAX (JK). AUTODOC recommends:
Examine stabiliser bushes. Replace them if needed.
Step 10

Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
Step 11

Install a new rod, tighten the fasteners. Use a combination spanner #15. Use HEX No.H5. Use a ratchet wrench.
Step 12

Tighten the fastener connecting the stabilizer link to the shock strut. Use a drive socket #15. Use a torque wrench. Tighten it to 48 Nm torque.
Step 13

Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #15. Use a torque wrench. Tighten it to 48 Nm torque.
Step 14

Treat all joints of the stabiliser link. Use copper grease.
Step 15

Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 16

Clean the brake disk surface. Use a brake cleaner.

AUTODOC recommends:
Replacement: anti roll bar links – FORD B-MAX (JK). After applying the spray, wait a few minutes.
Step 17

Install the wheel.

Replacement: anti roll bar links – FORD B-MAX (JK). Tip:
To avoid injury, hold up the wheel when screwing in the fastening bolts.
Step 18

Screw in the wheel bolts. Use wheel impact socket #19.
Step 19

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #19. Use a torque wrench. Tighten it to 110 nm torque.
Step 20

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Need New Tyres?

Find out which tyre and wheel sizes are compatible with the FORD B-Max (JK8) model

Ford B-Max JK tyre size

How to change front wheel bearing on FORD B-Max (JK8) – replacement guide

Free download PDF
4.22 MB
How to change front brake pads on FORD B-MAX (JK) – replacement guide

Free download PDF
1.44 MB
How to change front brake discs on FORD B-MAX (JK) – replacement guide

Free download PDF
1.71 MB
How to change serpentine belt on FORD B-MAX (JK) – replacement guide

Free download PDF
768 KB
How to change spark plugs on FORD B-MAX (JK) – replacement guide

Free download PDF
931.84 KB
How to change engine oil and filter on FORD B-Max (JK8) – replacement guide

Free download PDF
2.39 MB

How to change anti roll bar links on a car – replacement tutorial

Universal

Free download PDF
972.8 KB
How to change front anti roll bar links on Ford Focus MK2 – replacement guide

Free download PDF
1.99 MB
How to change front anti roll bar links on Ford Fiesta JA8 – replacement guide

Free download PDF
1.31 MB
How to change front anti roll bar links on Ford Mondeo Mk3 saloon – replacement guide

Free download PDF
1.29 MB
How to change front anti roll bar links on Ford Focus DAW – replacement guide

Free download PDF
1.27 MB
How to change rear anti roll bar links on Ford Mondeo Mk3 saloon – replacement guide

Free download PDF
1.23 MB

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

How to remove rust | AUTODOC tips

27K views

Published on: 16/09/2021
5 reasons why your car is making a knocking sound

11K views

Published on: 05/06/2025
Unveiling the secrets: Detecting vacuum leaks with a Smoke Machine | AUTODOC

19K views

Published on: 23/07/2020
Transform Your Car's Look: 6 Simple Accessories You Need to Try!

3K views

Published on: 18/11/2021