Disclaimer
How to change front anti roll bar links on FIAT Barchetta (183) – replacement guide
downloads:
2
Views:
28
Important!
This replacement procedure can be used for:
FIAT BARCHETTA (183) 1.8 16V … View more
The steps may slightly vary depending on the car design.
FIAT BARCHETTA (183) 1.8 16V … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for BARCHETTA (183) and other FIAT models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Drive socket # 13
Wheel impact socket #19
Ratchet wrench
Torque wrench
Crow bar
Hydraulic transmission jack
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on FIAT BARCHETTA (183) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – FIAT BARCHETTA (183). Take the following steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. FIAT BARCHETTA (183) - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.AUTODOC recommends:Replacement: anti roll bar links – FIAT BARCHETTA (183). After applying the spray, wait a few minutes.Wear protective goggles. - Step 7
Unscrew the fastener connecting the stabilizer bar with the control arm. Use a drive socket #13. Use a ratchet wrench. - Step 8Remove the stabilizer bush brackets. Use a crowbar.Step 9
Remove the stabilizer rod. Use a crowbar.Replacement: anti roll bar links – FIAT BARCHETTA (183). Tip from AUTODOC experts:Examine stabiliser bushes. Replace them if needed. - Step 10
Support the arm. Use a hydraulic transmission jack. - Step 11
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 12
Install a new rod, tighten the fasteners. Use a crowbar. - Step 13
Install the stabilizer bush brackets. Use a crowbar.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FIAT Barchetta (183) model
Popular maintenance tutorials for Fiat Barchetta 183
Complete guides for changing the Drop links on different FIAT BARCHETTA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FIAT BARCHETTA (183)
View more
#DIY Wheel Rim Restoration: Revive Scratches and Chips Easily!
Motorcycle fuel tank restoration
3 essential tips for choosing summer tyres | Get ready for warmer weather
How to restore a steering wheel | AUTODOC tips
Most commonly replaced car parts on FIAT BARCHETTA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME




























