Disclaimer
How to change front anti roll bar links on DS DS 3 – replacement guide
downloads:
0
Views:
4
Important!
This replacement procedure can be used for:
DS DS 3 1.2 VTi 82 (SAHMZ6), DS DS 3 1.2 THP 110 / PureTech 110 (SAHNPS, SAHNZ6, SAHNZT), DS DS 3 1.6 THP 165 (SA5GZM), DS DS 3 1.6 BlueHDi 100 (SABHY0, SABHYT), DS DS 3 1.6 BlueHDi 120 (SABHZM), DS DS 3 1.2 THP 130 (SAHNYM), DS DS 3 1.6 BlueHDi 75 (SABHW6), DS DS 3 1.6 THP 208 (SA5GRM), DS DS 3 1.6 THP 156 (SA5FV8), DS DS 3 1.6 THP (SA5GZM), DS DS 3 1.6 e-HDi 92 (SA9HP0), DS DS 3 1.6 BlueHDi 116 (SABHXM), DS DS 3 1.6 THP (SA5GWM), DS DS 3 1.6 Vti (SA5FS9, SA5FS0), DS DS 3 1.4 HDi 70 (SA8HR4, SA8HP4) … View more
The steps may slightly vary depending on the car design.
DS DS 3 1.2 VTi 82 (SAHMZ6), DS DS 3 1.2 THP 110 / PureTech 110 (SAHNPS, SAHNZ6, SAHNZT), DS DS 3 1.6 THP 165 (SA5GZM), DS DS 3 1.6 BlueHDi 100 (SABHY0, SABHYT), DS DS 3 1.6 BlueHDi 120 (SABHZM), DS DS 3 1.2 THP 130 (SAHNYM), DS DS 3 1.6 BlueHDi 75 (SABHW6), DS DS 3 1.6 THP 208 (SA5GRM), DS DS 3 1.6 THP 156 (SA5FV8), DS DS 3 1.6 THP (SA5GZM), DS DS 3 1.6 e-HDi 92 (SA9HP0), DS DS 3 1.6 BlueHDi 116 (SABHXM), DS DS 3 1.6 THP (SA5GWM), DS DS 3 1.6 Vti (SA5FS9, SA5FS0), DS DS 3 1.4 HDi 70 (SA8HR4, SA8HP4) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for DS 3 and other DS models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #16
Torx bit T30
Drive socket # 17
Wheel impact socket #17
Ratchet wrench
Wheel chock
Replacement: anti roll bar links – DS DS 3. AUTODOC recommends:
- Replace the stabiliser links on DS DS 3 in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – DS DS 3. Recommended sequence of steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: anti roll bar links – DS DS 3. Tip:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use Torx T30. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #16. Use Torx T30. Use a ratchet wrench. - Step 9
Remove the stabilizer rod.AUTODOC recommends:Examine stabiliser bushes. Replace them if needed. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 11
Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the DS DS3 Hatchback model
Popular maintenance tutorials for DS DS 3
Complete guides for changing the Drop links on different DS DS 3 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your DS DS 3
View more
How I started restoring a driveshaft | Drivetrain restoration – Part 1
2 ways to clean the EGR valve – which one is better?
#DIY Guide: How to Fix a Cracked Windscreen Without a Garage Visit
What to do if your check engine light is on | AUTODOC tips
Most commonly replaced car parts on DS DS 3
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


















