Disclaimer
How to change track rod end on DS DS 3 – replacement guide
downloads:
2
Views:
21
Important!
This replacement procedure can be used for:
DS DS 3 1.2 VTi 82 (SAHMZ6), DS DS 3 1.2 THP 110 / PureTech 110 (SAHNPS, SAHNZ6, SAHNZT), DS DS 3 1.6 THP 165 (SA5GZM), DS DS 3 1.6 BlueHDi 100 (SABHY0, SABHYT), DS DS 3 1.6 BlueHDi 120 (SABHZM), DS DS 3 1.2 THP 130 (SAHNYM), DS DS 3 1.6 BlueHDi 75 (SABHW6), DS DS 3 1.6 THP 208 (SA5GRM), DS DS 3 1.6 THP 156 (SA5FV8), DS DS 3 1.6 Vti (SA5FS9, SA5FS0), DS DS 3 1.6 THP (SA5GZM), DS DS 3 1.6 e-HDi 92 (SA9HP0), DS DS 3 1.6 BlueHDi 116 (SABHXM), DS DS 3 1.6 THP (SA5GWM) … View more
The steps may slightly vary depending on the car design.
DS DS 3 1.2 VTi 82 (SAHMZ6), DS DS 3 1.2 THP 110 / PureTech 110 (SAHNPS, SAHNZ6, SAHNZT), DS DS 3 1.6 THP 165 (SA5GZM), DS DS 3 1.6 BlueHDi 100 (SABHY0, SABHYT), DS DS 3 1.6 BlueHDi 120 (SABHZM), DS DS 3 1.2 THP 130 (SAHNYM), DS DS 3 1.6 BlueHDi 75 (SABHW6), DS DS 3 1.6 THP 208 (SA5GRM), DS DS 3 1.6 THP 156 (SA5FV8), DS DS 3 1.6 Vti (SA5FS9, SA5FS0), DS DS 3 1.6 THP (SA5GZM), DS DS 3 1.6 e-HDi 92 (SA9HP0), DS DS 3 1.6 BlueHDi 116 (SABHXM), DS DS 3 1.6 THP (SA5GWM) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Track Rod End for DS 3 and other DS models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Drive socket # 16
Drive socket # 17
Combination spanner #24
Combination spanner #25
Wheel impact socket #17
Ratchet wrench
Tap wrench
Vernier caliper
Ball joint puller
Wheel chock
Replacement: track rod end – DS DS 3. AUTODOC recommends:
- Replace tie rod ends in pairs.
- The replacement procedure is identical for the right and left tie rod ends.
- All work should be done with the engine stopped.
Replacement: track rod end – DS DS 3. Take the following steps:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. DS DS 3 - Step 5
Remove the wheel. - Step 6
Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray. - Step 7
When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper. - Step 8
Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #24 (2 pieces). - Step 9
Unscrew the end fastening nut to the steering knuckle. Use a drive socket #16. Use a tap wrench. - Step 10
Disconnect the tie rod end from the steering knuckle. Use a ball joint puller. - Step 11
Screw the end out of the tie rod. - Step 12
Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray. - Step 13
Screw on a new tie rod end.Replacement: track rod end – DS DS 3. Tip from AUTODOC experts:While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements. - Step 14
Connect the tie rod end to the steering knuckle.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the DS DS3 Hatchback model
Popular maintenance tutorials for DS DS 3
Complete guides for changing the Tie rod end on different DS DS 3 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your DS DS 3
View more
Don’t Replace, Just Polish! Headlight Restoration with AUTODOC
Petrol or diesel: The engine showdown! | AUTODOC
How to unlock your car without a key | AUTODOC tips
Understanding Car Tools: The Key Differences You Need to Know | AUTODOC tips
Most commonly replaced car parts on DS DS 3
ОЕ number
Time to replace parts? Get even better deals in our Shop app.

SCAN ME




















