Disclaimer
How to change front anti roll bar links on DS DS 4 / DS 4 CROSSBACK – replacement guide
downloads:
0
Views:
0
Important!
This replacement procedure can be used for:
DS DS 4 / DS 4 CROSSBACK 1.2 THP 130 (NXHNYM), DS DS 4 / DS 4 CROSSBACK 1.6 THP 165, DS DS 4 / DS 4 CROSSBACK 1.6 THP 210, DS DS 4 / DS 4 CROSSBACK 1.6 BlueHDi 120, DS DS 4 / DS 4 CROSSBACK 2.0 BlueHDi 150, DS DS 4 / DS 4 CROSSBACK 2.0 BlueHDi 180, DS DS 4 / DS 4 CROSSBACK 1.6 BlueHDi 100, DS DS 4 / DS 4 CROSSBACK 1.6 BlueHDi 115 … View more
The steps may slightly vary depending on the car design.
DS DS 4 / DS 4 CROSSBACK 1.2 THP 130 (NXHNYM), DS DS 4 / DS 4 CROSSBACK 1.6 THP 165, DS DS 4 / DS 4 CROSSBACK 1.6 THP 210, DS DS 4 / DS 4 CROSSBACK 1.6 BlueHDi 120, DS DS 4 / DS 4 CROSSBACK 2.0 BlueHDi 150, DS DS 4 / DS 4 CROSSBACK 2.0 BlueHDi 180, DS DS 4 / DS 4 CROSSBACK 1.6 BlueHDi 100, DS DS 4 / DS 4 CROSSBACK 1.6 BlueHDi 115 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for DS 4 / DS 4 CROSSBACK and other DS models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #16
Drive socket # 15
Drive socket # 17
Wheel impact socket #17
Ratchet wrench
Wheel chock
Replacement: anti roll bar links – DS DS 4 / DS 4 CROSSBACK. AUTODOC experts recommend:
- Replace the stabiliser links on DS DS 4 / DS 4 CROSSBACK in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – DS DS 4 / DS 4 CROSSBACK. Recommended sequence of steps:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: anti roll bar links – DS DS 4 / DS 4 CROSSBACK. AUTODOC recommends:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Remove the ABS wiring harness bracket. - Step 7
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 8
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #15. Use a ratchet wrench. - Step 9
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 10
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use a drive socket #15. Use a ratchet wrench. - Step 11
Remove the stabilizer rod.Replacement: anti roll bar links – DS DS 4 / DS 4 CROSSBACK. Tip from AUTODOC experts:Examine stabiliser bushes. Replace them if needed. - Step 12
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 13
Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the DS DS4 / DS4 Crossback model
Popular maintenance tutorials for DS DS 4 / DS 4 CROSSBACK
Complete guides for changing the Drop links on different DS DS 4 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your DS DS 4 / DS 4 CROSSBACK
View more
Discover the 4 Key Reasons Your CHECK ENGINE Light Could Be On | AUTODOC Tips
Transform Your Engine Bay: Affordable Valve Cover Restoration with AUTODOC
5 most common causes of oil leaks | AUTODOC tips
How to repair a bumper yourself | AUTODOC tips
Most commonly replaced car parts on DS DS 4
Time to replace parts? Get even better deals in our Shop app.

SCAN ME























