Disclaimer
How to change front anti roll bar links on DS DS5 – replacement guide
downloads:
0
Views:
4
Important!
This replacement procedure can be used for:
DS DS 5 Hatchback 1.6 THP 210, DS DS 5 Hatchback 2.0 BlueHDi 150, DS DS 5 Hatchback 2.0 BlueHDi 180, DS DS 5 Hatchback 1.6 BlueHDi 120, DS DS 5 Hatchback 1.6 THP 165 (KF5GZT), DS DS 5 Hatchback 1.6 BlueHDi 115, DS DS 5 Hatchback 2.0 BlueHDi 135, DS DS 5 Hatchback Hybrid4 … View more
The steps may slightly vary depending on the car design.
DS DS 5 Hatchback 1.6 THP 210, DS DS 5 Hatchback 2.0 BlueHDi 150, DS DS 5 Hatchback 2.0 BlueHDi 180, DS DS 5 Hatchback 1.6 BlueHDi 120, DS DS 5 Hatchback 1.6 THP 165 (KF5GZT), DS DS 5 Hatchback 1.6 BlueHDi 115, DS DS 5 Hatchback 2.0 BlueHDi 135, DS DS 5 Hatchback Hybrid4 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for DS 5 Hatchback and other DS models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #16
Drive socket # 15
Drive socket # 17
Wheel impact socket #17
Ratchet wrench
Wheel chock
Replacement: anti roll bar links – DS DS5. AUTODOC experts recommend:
- Replace the stabiliser links on DS DS5 in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – DS DS5. Recommended sequence of steps:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: anti roll bar links – DS DS5. AUTODOC recommends:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Remove the ABS wiring harness bracket. - Step 7
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 8
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #15. Use a ratchet wrench. - Step 9
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 10
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use a drive socket #15. Use a ratchet wrench. - Step 11
Remove the stabilizer rod.Replacement: anti roll bar links – DS DS5. Tip from AUTODOC experts:Examine stabiliser bushes. Replace them if needed. - Step 12
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 13
Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the DS DS 5 Hatchback model
Popular maintenance tutorials for DS DS5
Complete guides for changing the Drop links on different DS DS 5 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your DS DS 5 Hatchback
View more
DIY alternator repair | AUTODOC tips
Top 4 Car Cleaning Products to Protect Your Car's Body | AUTODOC Tips
DIY starter repair | AUTODOC tips
Top 5 mistakes when replacing spark plugs | AUTODOC tips
Most commonly replaced car parts on DS DS 5
Time to replace parts? Get even better deals in our Shop app.

SCAN ME























