Disclaimer
How to change front anti roll bar links on DS DS 3 Convertible – replacement guide
downloads:
0
Views:
3
Important!
This replacement procedure can be used for:
DS DS 3 Convertible 1.2 THP 110, DS DS 3 Convertible 1.6 THP 165, DS DS 3 Convertible 1.6 BlueHDi 100, DS DS 3 Convertible 1.6 BlueHDi 120, DS DS 3 Convertible 1.2 THP 130, DS DS 3 Convertible 1.2 VTi 82, DS DS 3 Convertible 1.6 THP 208, DS DS 3 Convertible 1.6 THP, DS DS 3 Convertible 1.6 BlueHDi 116, DS DS 3 Convertible 1.6 THP … View more
The steps may slightly vary depending on the car design.
DS DS 3 Convertible 1.2 THP 110, DS DS 3 Convertible 1.6 THP 165, DS DS 3 Convertible 1.6 BlueHDi 100, DS DS 3 Convertible 1.6 BlueHDi 120, DS DS 3 Convertible 1.2 THP 130, DS DS 3 Convertible 1.2 VTi 82, DS DS 3 Convertible 1.6 THP 208, DS DS 3 Convertible 1.6 THP, DS DS 3 Convertible 1.6 BlueHDi 116, DS DS 3 Convertible 1.6 THP … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for DS 3 Convertible and other DS models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #16
Torx bit T30
Drive socket # 17
Wheel impact socket #17
Ratchet wrench
Wheel chock
Replacement: anti roll bar links – DS DS 3 Convertible. AUTODOC recommends:
- Replace the stabiliser links on DS DS 3 Convertible in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – DS DS 3 Convertible. Recommended sequence of steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: anti roll bar links – DS DS 3 Convertible. Tip:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use Torx T30. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #16. Use Torx T30. Use a ratchet wrench. - Step 9
Remove the stabilizer rod.AUTODOC recommends:Examine stabiliser bushes. Replace them if needed. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 11
Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the DS DS3 Convertible model
Popular maintenance tutorials for DS3 Convertible
Complete guides for changing the Drop links on different DS DS 3 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your DS DS 3 Convertible
View more
Fuse Replacement Made Simple: Step-by-Step Guide | AUTODOC
5 mistakes when replacing consumables
How to Fix a Squealing Belt: Causes & Solutions | AUTODOC Expert Tips
Unveiling the secrets: Detecting vacuum leaks with a Smoke Machine | AUTODOC
Most commonly replaced car parts on DS DS 3
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


















