Important!

This replacement procedure can be used for:
DS DS7 Crossback E-TENSE 4x4 (J45GBU), DS DS7 Crossback PureTech 130 (JRHNSU), DS DS7 Crossback 1.6 PureTech 180 (J45GFR), DS DS7 Crossback 1.5 BlueHDi 130 (JCYHZJ, JCYHZR), DS DS7 Crossback 2.0 BlueHDi 180 (JJEHZR), DS DS7 Crossback 1.6 PureTech 225 (J45GCR, J45GGR) … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for DS7 Crossback and other DS models

Anti-roll bar link

        Anti-roll bar link for DS7 Crossback Petrol (225 hp)
      
        Anti-roll bar link for DS7 Crossback Diesel (177 hp)
      
        Anti-roll bar link for DS7 Crossback Diesel (130 hp)
      
        Anti-roll bar link for DS7 Crossback Petrol (180 hp)
      
        Anti-roll bar link for DS7 Crossback Petrol (130 hp)
      
        Anti-roll bar link for DS7 Crossback Petrol/Electro (300 hp)

Replacement: anti roll bar links – DS DS7 Crossback. Tools you need:

                        Wire brush
                      
                        WD-40 spray
                      
                        Brake cleaner 
                      
                        Copper grease 
                      
                        Combination spanner #16
                      
                        Drive socket # 15 
                      
                        Drive socket # 17 
                      
                        Wheel impact socket #17
                      
                        Ratchet wrench
                      
                        Wheel chock

Buy tools

Replacement: anti roll bar links – DS DS7 Crossback. AUTODOC experts recommend:

Replace the stabiliser links on DS DS7 Crossback in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
All work should be done with the engine stopped.

Replacement: anti roll bar links – DS DS7 Crossback. Recommended sequence of steps:

Step 1

Secure the wheels with chocks.

Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #17.
Step 3

Raise the front of the car and secure on supports.

Step 4

Unscrew the wheel bolts.

Replacement: anti roll bar links – DS DS7 Crossback. AUTODOC recommends:
To avoid injury, hold up the wheel when unscrewing the bolts.
Step 5

Remove the wheel.
Step 6

Remove the ABS wiring harness bracket.
Step 7

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 8

Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #15. Use a ratchet wrench.
Step 9

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 10

Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use a drive socket #15. Use a ratchet wrench.
Step 11

Remove the stabilizer rod.

Replacement: anti roll bar links – DS DS7 Crossback. Tip from AUTODOC experts:
Examine stabiliser bushes. Replace them if needed.
Step 12

Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
Step 13

Install a new rod, tighten the fasteners.
Step 14

Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #17. Use a torque wrench. Tighten it to 36 Nm torque.
Step 15

Tighten the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a torque wrench. Tighten it to 36 Nm torque.
Step 16

Treat all joints of the stabiliser link. Use copper grease.
Step 17

Install the ABS wiring harness bracket.
Step 18

Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 19

Clean the brake disk surface. Use a brake cleaner.

AUTODOC recommends:
Replacement: anti roll bar links – DS DS7 Crossback. After applying the spray, wait a few minutes.
Step 20

Install the wheel.

Replacement: anti roll bar links – DS DS7 Crossback. Tip from AUTODOC:
To avoid injury, hold up the wheel when screwing in the fastening bolts.
Step 21

Screw in the wheel bolts. Use wheel impact socket #17.
Step 22

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #17. Use a torque wrench. Tighten it to 100 nm torque.
Step 23

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the DS DS7 Crossback model.

DS7 Crossback tyre size

How to change engine oil and filter on DS DS7 Crossback – replacement guide

Free download PDF
1.52 MB
How to change fuel filter on DS DS7 Crossback – replacement guide

Free download PDF
931.84 KB
How to change ignition coil on DS DS7 Crossback – replacement guide

Free download PDF
890.88 KB
How to change front lower arm on DS DS 3 – replacement guide

Free download PDF
2.68 MB
How to change front lower arm on DS DS 3 Convertible – replacement guide

Free download PDF
2.68 MB
How to change serpentine belt on DS DS 3 Convertible – replacement guide

Free download PDF
768 KB

How to change anti roll bar links on a car – replacement tutorial

Universal

Free download PDF
972.8 KB
How to change front anti roll bar links on DS DS5 – replacement guide

Free download PDF
1.33 MB
How to change front anti roll bar links on DS DS 4 / DS 4 CROSSBACK – replacement guide

Free download PDF
1.36 MB
How to change front anti roll bar links on DS DS 3 – replacement guide

Free download PDF
1.25 MB
How to change front anti roll bar links on DS DS 3 Convertible – replacement guide

Free download PDF
1.25 MB
How to change front anti roll bar links on DS DS 3 Crossback (U_) – replacement guide

Free download PDF
1.25 MB

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Scan

To download the app:

- scan the QR code
- download from App Store
- download from Google Play

How to remove rust | AUTODOC tips

25K views

Published on: 16/09/2021
How to replace a wheel stud | AUTODOC tips

8K views

Published on: 08/12/2020
Replacing your engine cooling fan | AUTODOC tips

3K views

Published on: 15/11/2020
How to prevent car windows from fogging up | AUTODOC tips

12K views

Published on: 04/02/2021