Disclaimer
How to change front anti roll bar links on CITROËN BERLINGO Platform/Chassis (B9) – replacement guide
downloads:
2
Views:
22
Important!
This replacement procedure can be used for:
CITROËN BERLINGO Platform/Chassis (B9) 1.6 HDi, CITROËN BERLINGO Platform/Chassis (B9) 1.6 BlueHDi, CITROËN BERLINGO Platform/Chassis (B9) 1.6 HDi, CITROËN BERLINGO Platform/Chassis (B9) 1.6 HDi 16V … View more
The steps may slightly vary depending on the car design.
CITROËN BERLINGO Platform/Chassis (B9) 1.6 HDi, CITROËN BERLINGO Platform/Chassis (B9) 1.6 BlueHDi, CITROËN BERLINGO Platform/Chassis (B9) 1.6 HDi, CITROËN BERLINGO Platform/Chassis (B9) 1.6 HDi 16V … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for BERLINGO Platform/Chassis (B9) and other CITROËN models
Alternative products
Anti-roll bar link
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #16
Drive socket # 15
Drive socket # 17
Wheel impact socket #17
Ratchet wrench
Wheel chock
Replacement: anti roll bar links – CITROËN BERLINGO Platform/Chassis (B9). AUTODOC experts recommend:
- Replace the stabiliser links on CITROËN BERLINGO Platform/Chassis (B9) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – CITROËN BERLINGO Platform/Chassis (B9). Recommended sequence of steps:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: anti roll bar links – CITROËN BERLINGO Platform/Chassis (B9). AUTODOC recommends:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Remove the ABS wiring harness bracket. - Step 7
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 8
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #15. Use a ratchet wrench. - Step 9
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 10
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use a drive socket #15. Use a ratchet wrench. - Step 11
Remove the stabilizer rod.Replacement: anti roll bar links – CITROËN BERLINGO Platform/Chassis (B9). Tip from AUTODOC experts:Examine stabiliser bushes. Replace them if needed. - Step 12
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 13
Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the CITROËN Berlingo II Platform/Chassis (B9) model
Popular maintenance tutorials for Citroen Berlingo Platform
Free download PDF
2.47 MB
Free download PDF1.46 MB
Free download PDF1.67 MB
Free download PDF614.4 KB
Complete guides for changing the Drop links on different CITROËN BERLINGO models
Free download PDF1.14 MB
Free download PDF2.08 MB
Free download PDF1.98 MB
Free download PDF1.09 MB
Free download PDF1.34 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your CITROËN BERLINGO Platform/Chassis (B9)
View more
Extend your engine's life: Avoid these 3 damaging factors | AUTODOC tips
BMW E30 Turbo Suspension Swap: Boost Your Handling | AUTODOC project
Discover the 4 Key Reasons Your CHECK ENGINE Light Could Be On | AUTODOC Tips
DIY starter repair | AUTODOC tips
Most commonly replaced car parts on CITROËN BERLINGO
Time to replace parts? Get even better deals in our Shop app.
SCAN ME