How to carry out replacement: Oil Filter 2.0 Vtec (CM4) HONDA ACCORD VII (CM)
Disclaimer
Change HONDA ACCORD VII (CM) 2.0 Vtec (CM4) Oil Filter yourself – manuals and video tutorials

How to change engine oil and filter on HONDA Accord VII Saloon (CM) – replacement guide

downloads: 1
Views: 7
Download your free tutorial and fix HONDA ACCORD VII (CM) 3.0 (CM6) problems yourself Download for free 1.09 MB Oil Filter for HONDA ACCORD VII (CM) Shop now
Leave a comment Open in a new tab
When to replace the Oil Filter on your HONDA ACCORD
Recommended replacement interval for the part category Oil filter : 1 year / 15000 km
Important!
This replacement procedure can be used for:
HONDA ACCORD VII (CM) 2.4 Vtec E (CM5) … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Oil Filter for ACCORD VII (CM) and other HONDA models
Alternative products
How to change Oil filter on HONDA ACCORD VII (CM) 2.0 Vtec (CM4) – step-by-step instructions for straightforward car repair Oil filter
Tools
Replacement: engine oil and filter – HONDA ACCORD VII (CM). List of the tools you'll need:
Wire brush
All-purpose cleaning spray
Torque wrench
Drive socket # 17
Oil filter cup socket 65/14-F
Ratchet wrench
Funnel
Oil drain pan
Buy tools
Replacement: engine oil and filter – HONDA ACCORD VII (CM). AUTODOC recommends:
  • Replace the oil filter every time when changing motor oil.
  • Wear gloves to prevent contact with hot liquid.
  • Use only new O-rings during installation.
  • Please note: all work on the car – HONDA ACCORD VII (CM) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Lift the car using a jack or place it over an inspection pit.
    Replacement: engine oil and filter – HONDA ACCORD VII (CM). AUTODOC experts recommend:
    The vehicle must be on even keel, and if it is at an angle, the drain plug must be at the lowest point.Unscrew the oil filler plug.
    Step 2
    How to change Oil Filter on HONDA ACCORD VII (CM) 2002 - free PDF and video manuals
    Put a waste oil container with at least 4 l capacity under the drainage hole.
  2. Step 3
    How to replace HONDA ACCORD VII (CM) 2.0 Vtec (CM4) 2003 Oil Filter - step-by-step manuals and video guides
    Clean the area of the oil pan drainage hole. Use a wire brush. Use all-purpose cleaning spray.
  3. Step 4
    HONDA ACCORD VII (CM) 2.4 Vtec E 2004 Oil Filter replacement: free workshop manuals
    Unscrew the drain plug. Use a drive socket #17. Use a ratchet wrench.
  4. Step 5
    Changing Oil Filter on HONDA ACCORD VII (CM) 3.0 (CM6) 2005 by yourself
    Drain the used oil.
    AUTODOC recommends:
    Caution! The oil may be hot.Wait until the oil has completely drained from the drainage hole.
  5. Step 6
    How to remove HONDA ACCORD 2.0 Vtec (CM4) 2006 Oil Filter - online easy-to-follow instructions
    Clean the area of the oil pan drainage hole.
  6. Step 7
    How to replace Oil Filter on HONDA ACCORD VII (CM) 2007: download PDF manuals and video instructions
    Screw in the new drainage plug and tighten it. Use a drive socket #17. Use a torque wrench. Tighten it to 39 nm torque.
  7. Step 8
    How hard is it to do yourself: Oil Filter replacement on HONDA ACCORD VII (CM) 3.0 2008 - download illustrated guide
    Clean the area of the oil pan drainage hole. Use all-purpose cleaning spray.
  8. Step 9
    Need to know how to renew Oil Filter on HONDA ACCORD 2002? This free workshop manual will help you to do it yourself
    Unscrew the oil filter. Use the 65/14-F socket. Use a ratchet wrench.
  9. Step 10
    Put the old oil filter in the container.
    Step 11
    Changing of Oil Filter on HONDA ACCORD VII (CM) 2003 won't be an issue if you follow this illustrated step-by-step guide
    Clean the oil filter seat. Use all-purpose cleaning spray.
  10. Step 12
    HONDA ACCORD 2.0 Vtec (CM4) Oil Filter replacement: online guides and video tutorials
    Screw the new filter into its place. Use the 65/14-F socket. Observe the recommended tightening torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the HONDA Accord VII Saloon (CM) model

HONDA ACCORD VII (CM) tyre size

Popular maintenance tutorials for HONDA ACCORD VII (CM)

More manuals for HONDA ACCORD VII (CM)

Complete guides for changing the Oil filters on different HONDA ACCORD models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY HONDA ACCORD VII (CM) Oil Filter replacement - online guide
Tips & tricks for your HONDA ACCORD VII (CM)
View more
  • How to change Oil filters on HONDA ACCORD VII (CM) 3.0 - replacement tricks
    How to Fix P0401 ✅ error code Insufficient EGR flow
    7K views
    Published on: 08/05/2025
  • Changing Engine oil filter HONDA ACCORD VII (CM) 2.0 Vtec (CM4) - Replacement Tips
    Motorcycle fuel tank restoration
    3K views
    Published on: 03/07/2025
  • Maintenance Hacks - HONDA ACCORD VII (CM) 2.4 Vtec E Oil filters replacement guide
    Kolbenschmidt plastic gauge overview
    3K views
    Published on: 23/04/2025
  • Replace Engine oil filter on HONDA ACCORD VII (CM) - free video tips
    Cold starts | 5 mistakes that wreck your car
    12K views
    Published on: 23/10/2025

Most commonly replaced car parts on HONDA ACCORD

Professional manuals for the most common HONDA models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
HONDA ACCORD VII (CM) Oil Filter replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME