Disclaimer
How to change brake drum on SEAT Cordoba Vario (6K5) – replacement guide
downloads:
1
Views:
15
Recommended replacement interval for the part category Brake drum : 100000 km
Important!
This replacement procedure can be used for:
SEAT Cordoba Vario (6K5) 1.9 SDI, SEAT Cordoba Vario (6K5) 1.6 i, SEAT Cordoba Vario (6K5) 1.9 TDI, SEAT Cordoba Vario (6K5) 1.6 i, SEAT Cordoba Vario (6K5) 1.9 TDI, SEAT Cordoba Vario (6K5) 1.6 i … View more
The steps may slightly vary depending on the car design.
SEAT Cordoba Vario (6K5) 1.9 SDI, SEAT Cordoba Vario (6K5) 1.6 i, SEAT Cordoba Vario (6K5) 1.9 TDI, SEAT Cordoba Vario (6K5) 1.6 i, SEAT Cordoba Vario (6K5) 1.9 TDI, SEAT Cordoba Vario (6K5) 1.6 i … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Brake Drum for Cordoba Vario (6K5) and other SEAT models
Alternative products

Wire brush
All-purpose cleaning spray
Multipurpose grease
Copper grease
Torque wrench
Combination spanner #10
Drive socket # 24
Wheel impact socket #17
Ratchet wrench
Hammer
Crow bar
Wheel chock
AUTODOC recommends:
- Replace the brake drums on SEAT CORDOBA Vario (6K5) in pair for the rear axle. Disregarding the parts state. It ensures even braking.
- The replacement procedure is identical for the right and left brake drums on the same axle.
- When replacing the brake drums, be sure to also change the brake shoes.
- Please note: all work on the car – SEAT CORDOBA Vario (6K5) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1
Engage the parking brake lever. - Step 2
Loosen the parking brake cable. Use a combination spanner #10. - Step 3Secure the wheels with chocks.Step 4
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 5Raise the rear of the car and secure on supports.Step 6
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. SEAT CORDOBA Vario (6K5) - Step 7
Remove the wheel. - Step 8
Clean the brake drum. Use a wire brush. Use all-purpose cleaning spray. - Step 9
Remove the wheel hub nut cap. Use a crowbar. Use a hammer. - Step 10
Remove the cotter pin securing the hub nut. Use a crowbar. Use a hammer. - Step 11
Unscrew the hub nut. Use a drive socket #24. Use a ratchet wrench. - Step 12
Remove the brake drum assembled with the wheel hub bearing. - Step 13
Clean the hub bearing mounting seat. Use all-purpose cleaning spray. - Step 14
Treat the wheel hub in the area where it contacts the brake drum. Use a multipurpose grease. - Step 15
Install the new brake drum assembled with the wheel hub bearing. - Step 16
Install the wheel.AUTODOC recommends:Important! Hold the wheel while screwing in the fastening bolts. SEAT CORDOBA Vario (6K5) - Step 17
Screw in the wheel bolts. Use wheel impact socket #17.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the SEAT Córdoba I Vario (6K5) model
Popular maintenance tutorials for Seat Cordoba 6K5
Complete guides for changing the Drum brakes on different SEAT CORDOBA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your SEAT Cordoba Vario (6K5)
View more
Deep interior cleaning | Car transformation by detailing
How to align the timing marks correctly on an EA888 engine
How to restore a steering wheel | AUTODOC tips
How to get your motorcycle ready for spring
Most commonly replaced car parts on SEAT CORDOBA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME




























