
Disclaimer
How to change brake drum on SEAT AROSA (6H) – replacement guide
downloads:
3
Views:
41

Recommended replacement interval for the part category Brake drum : 100000 km
Important!
This replacement procedure can be used for:
SEAT AROSA (6H) 1.0 … View more
The steps may slightly vary depending on the car design.
SEAT AROSA (6H) 1.0 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Brake Drum for AROSA (6H) and other SEAT models
Brake drum
Alternative products

Wire brush
All-purpose cleaning spray
Multipurpose grease
Copper grease
Torque wrench
Combination spanner #10
Drive socket # 24
Wheel impact socket #17
Ratchet wrench
Hammer
Crow bar
Wheel chock
AUTODOC recommends:
- Replace the brake drums on SEAT AROSA (6H) in pair for the rear axle. Disregarding the parts state. It ensures even braking.
- The replacement procedure is identical for the right and left brake drums on the same axle.
- When replacing the brake drums, be sure to also change the brake shoes.
- Please note: all work on the car – SEAT AROSA (6H) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Engage the parking brake lever.
- Step 2Loosen the parking brake cable. Use a combination spanner #10.
- Step 3Secure the wheels with chocks.Step 4Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 5Raise the rear of the car and secure on supports.Step 6Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. SEAT AROSA (6H)
- Step 7Remove the wheel.
- Step 8Clean the brake drum. Use a wire brush. Use all-purpose cleaning spray.
- Step 9Remove the wheel hub nut cap. Use a crowbar. Use a hammer.
- Step 10Remove the cotter pin securing the hub nut. Use a crowbar. Use a hammer.
- Step 11Unscrew the hub nut. Use a drive socket #24. Use a ratchet wrench.
- Step 12Remove the brake drum assembled with the wheel hub bearing.
- Step 13Clean the hub bearing mounting seat. Use all-purpose cleaning spray.
- Step 14Treat the wheel hub in the area where it contacts the brake drum. Use a multipurpose grease.
- Step 15Install the new brake drum assembled with the wheel hub bearing.
- Step 16Install the wheel.AUTODOC recommends:Important! Hold the wheel while screwing in the fastening bolts. SEAT AROSA (6H)
- Step 17Screw in the wheel bolts. Use wheel impact socket #17.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the SEAT Arosa (6H) model
Popular maintenance tutorials for Seat Arosa 6h
Complete guides for changing the Drum brakes on different SEAT AROSA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your SEAT AROSA (6H)
View more
- How to Prevent Premature Wear on Your Car Boot Damper | AUTODOC
- How to Polish Your Car Yourself and Save Money on Garage Services | AUTODOC tips
- Top Automatic Transmission Blunders You Must Dodge | AUTODOC Insights
- 5 Essential Tips to Prepare Your Car for Winter | AUTODOC tips
Most commonly replaced car parts on SEAT AROSA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME