Replacement: air filter – FIAT DOBLO (119). Tip from AUTODOC experts:
Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
All work should be done with the engine stopped.
Replacement: air filter – FIAT DOBLO (119). Recommended sequence of steps:
Step 1
Open the bonnet.
Step 2
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
Step 3
Undo the fastening screws of the air filter cover. Use a drive socket #8. Use a ratchet wrench.
Step 4
Take off the filter lid.
Step 5
Remove the filter element from the filter housing.
Step 6
Clean the air filter cover and housing.
Replacement: air filter – FIAT DOBLO (119). Tip:
Before cleaning the air filter cover and housing, cover the air duct parts, mass airflow sensor (if available), throttle valve with a clean cloth.
Step 7
Insert a new filter element into the filter housing. Make sure that the filter edge fits tight to the housing.
Replacement: air filter – FIAT DOBLO (119). AUTODOC experts recommend:
Check out the correct location of the filter element. Do not skew.FIAT DOBLO (119) – It's important to only use high-quality filters.During installation, make sure to prevent dust and dirt from getting into the air filter housing.
Step 8
Reinstall the air filter cover. Fasten it.
Step 9
Screw in the fastening screws of the air filter cover. Use a drive socket #8. Use a ratchet wrench.
Step 10
Remove the fender protection cover.
Step 11
Close the hood.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FIAT Doblo I Estate (119, 223) model