
Disclaimer
How to change a front suspension arm on the FORD Transit Tourneo (FC_ _) – replacement guide
downloads:
0
Views:
5
Important!
This replacement procedure can be used for:
FORD TRANSIT TOURNEO (FC_ _) 2.0, FORD TRANSIT TOURNEO (FC_ _) 2.0, FORD TRANSIT TOURNEO (FC_ _) 2.0 … View more
The steps may slightly vary depending on the car design.
FORD TRANSIT TOURNEO (FC_ _) 2.0, FORD TRANSIT TOURNEO (FC_ _) 2.0, FORD TRANSIT TOURNEO (FC_ _) 2.0 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Control Arm for TRANSIT TOURNEO (FC_ _) and other FORD models
Suspension arm
Alternative products

Wire brush
WD-40 spray
All-purpose cleaning spray
Ceramic grease
Torque wrench
21 mm combination spanner
18 mm socket
21 mm socket
24 mm socket
21 mm wheel impact socket
Ratchet wrench or power tool for the removal/installation of threaded fasteners
Tommy bar
Mounting lever
Ball joint separator
Transmission jack or an additional vehicle jack
Car lift or jack with jack stands, and wheel chocks
Replacement: front lower arm – FORD TRANSIT TOURNEO (FC_ _). AUTODOC experts recommend:
- The replacement procedure is identical for the left and right control arms.
- All the work should be carried out with the ignition switched off.
Replacement: front lower arm – FORD TRANSIT TOURNEO (FC_ _). Recommended sequence of steps:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel nuts. Use a 21 mm wheel impact socket. Use a tommy bar.
- Step 3Raise the vehicle.Warning!If you are using a jack, make sure the car is parked on a hard, flat surface.Make sure to additionally secure the car with jack stands.Step 4Unscrew the wheel nuts.Replacement: front lower arm – FORD TRANSIT TOURNEO (FC_ _). Tip:To avoid injury, hold up the wheel when unscrewing the nuts.
- Step 5Remove the wheel.
- Step 6Clean all the connections of the control arm. Use a wire brush. Use WD-40 spray.
- Step 7Unscrew the fastener connecting the ball joint to the control arm. Use a 24 mm socket. Use a ratchet wrench.
- Step 8Jack up the steering knuckle. Use a transmission jack or an additional vehicle jack.
- Step 9Disconnect the ball joint from the control arm. Use a ball joint separator.
- Step 10Remove the support from under the steering knuckle.
- Step 11Unscrew the rear fastener of the control arm. Use a 21 mm socket. Use a ratchet wrench.
- Step 12Remove the fastening bolt.
- Step 13Unscrew the front fastener of the control arm. Use a 21 mm combination spanner. Use an 18 mm socket. Use a ratchet wrench.
- Step 14Remove the fastening bolt.
- Step 15Remove the control arm. Use a mounting lever.
- Step 16Clean the control arm mounting seats. Use a wire brush. Use an all-purpose cleaning spray.
- Step 17Install a new control arm.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FORD Transit Tourneo (FC_ _) model
Popular maintenance tutorials for FORD TRANSIT TOURNEO (FC_ _)
Complete guides for changing the Control arm on different FORD TRANSIT models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FORD TRANSIT TOURNEO (FC_ _)
View more
- Why Checking Your Oil is Crucial for Engine Performance
- 5 possible reasons why your car heater isn't working
- The most common problems when buying a used car | AUTODOC
- How to Safely Wash Your Car in Winter Without Damage | AUTODOC tips
Most commonly replaced car parts on FORD TRANSIT
Time to replace parts? Get even better deals in our Shop app.

SCAN ME