
Disclaimer
How to change front ABS sensor on FORD Transit Mk6 Minibus (V347, V348) – replacement guide
downloads:
0
Views:
9
Important!
This replacement procedure can be used for:
FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi RWD, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi RWD, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.4 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.4 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.4 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.4 TDCi 4x4, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 3.2 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi RWD, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi RWD … View more
The steps may slightly vary depending on the car design.
FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi RWD, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi RWD, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.4 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.4 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.4 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.4 TDCi 4x4, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 3.2 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi RWD, FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) 2.2 TDCi RWD … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – ABS Sensor for Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC) and other FORD models
Alternative products

A wire brush
WD-40 spray
An all-purpose cleaning spray
Ceramic grease
An electronic spray
A torque wrench
An 8 mm socket
A 21 mm wheel impact socket
A ratchet wrench
A tommy bar
A plastic trim removal tool
A clip removal tool
A fender cover
Wheel chocks
Replacement: ABS sensor – FORD TRANSIT Bus. AUTODOC recommends:
- All the work should be carried out with the ignition switched off.
Replacement: ABS sensor – FORD TRANSIT Bus. Use the following procedure:
- Step 1Open the bonnet.Step 2Use a fender protection cover to avoid damaging the paintwork and plastic parts of the car.Step 3
Secure the wheels with chocks. - Step 4
Loosen the wheel nuts. Use a 21 mm wheel impact socket. Use a tommy bar. - Step 5Raise the car.Warning!If you are using a jack, make sure the car is parked on a flat, even surface.Make sure to additionally secure the car with jack stands.Step 6
Unscrew the wheel nuts.Caution!Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. FORD TRANSIT Bus - Step 7
Remove the wheel. - Step 8
Detach the ABS sensor connector. - Step 9
Detach the ABS sensor wiring. Use a plastic trim removal tool. Use a clip removal tool. - Step 10
Clean the ABS sensor fastener. Use a wire brush. Use WD-40 spray. - Step 11
Unscrew the ABS sensor fastener. Use an 8 mm socket. Use a ratchet wrench. - Step 12
Remove the fastening bolt. - Step 13
Remove the ABS sensor. - Step 14
Clean the mounting seat of the ABS sensor. Use a wire brush. Use an all-purpose cleaning spray. - Step 15
Install a new ABS sensor.Replacement: ABS sensor – FORD TRANSIT Bus. Tip:To prevent the sensor from sticking, apply some grease to its mounting seat before installing it. - Step 16
Install the fastening bolt.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FORD Transit Mk6 Minibus (V347, V348) model
Popular maintenance tutorials for Ford Transit Mk6 Minibus
Complete guides for changing the Wheel speed sensor on different FORD TRANSIT models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FORD Transit Mk6 Bus (V347, V348, FD, FB, FS, FZ, FC)
View more
Transform Your Car's Look: 6 Simple Accessories You Need to Try!
DIY brake caliper restoration | AUTODOC tips
The Ultimate Guide to Engine Bay Cleaning | AUTODOC
How to Use Sandblasting Equipment: Step-by-Step Guide | AUTODOC Tips
Most commonly replaced car parts on FORD TRANSIT
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


































